Watch official ASUS videos for installation, disassembly, and repair guidance.
Open ASUS Installation Guide File / Videos
Complete specifications for reference:
1422-00X5000
1422-00X6000
14G221037003
14G221037000
14G221037001
14G221037002
Asus A73E
A73S
A73SD
A73SJ
A73SM
A73SV
K73E
K73S
K73SD
K73SJ
K73SM
K73SV
X73E
X73S
X73SD
X73SJ
X73SM
X73SV
LCD video signal cable for ASUS K73 A73 X73 LED 1422-00X5000 40pin – a high‑quality LCD video cable for laptops, transmitting video and backlight signals.
Key specifications:
Compatibility: Direct replacement for . Ensure the connector width matches the motherboard header.
Installation tip: Route the cable through the hinge with care – avoid sharp bends. Lock the ZIF tabs securely.
Warranty & Support: All products come with a 7‑day return policy and free technical support. If you have any compatibility questions, contact our team at info@pcspare.com.
SKU: LT-682 | Last updated: 2026-10-21 07:25:33
How to verify your screen type: Check your laptop's specifications online, look at the original cable's connector – if it has more than 30 pins (for eDP) or extra separate wires, it is likely a touch cable. Also, check the Device Manager under "Human Interface Devices" – if a touchscreen is listed, your screen supports touch.
If unsure, contact our support with your laptop's full model number and the part number printed on your original cable.
How to check your original cable: Look for printed markings on the cable (e.g., "30P 0.5mm") or measure with a caliper if you have one. You can also count the pins on the connector carefully.
Important: The cable must match the part number of your original cable or be listed as a compatible alternative. Using an incompatible cable may result in:
Always refer to the cable's specifications and compare with your laptop's service manual.
Warning: The LCD cable is extremely fragile – avoid sharp bends (especially at 90° angles), and never pull on the cable itself; always hold the connector.
Access requirements:
The cable is often one of the first components to fail in laptops due to repeated hinge flexing – always inspect the old cable for visible wear at the hinge area.
Connection steps:
Do not force the connector – if it does not go in easily, check orientation and ensure no pins are bent.
Critical precautions:
Troubleshooting if the display does not work after installation:
Quick diagnostic tip: If you have access to an external monitor, connect it to the laptop. If the external display works correctly, the issue is likely the LCD cable or the panel itself. If external display also has issues, the graphics chip or motherboard may be the problem.
If the problem persists, contact our support with your laptop model and the exact part number of your original cable.