Watch official MSI videos for installation, disassembly, and repair guidance.
Open MSI Installation Guide File / Videos
Complete specifications for reference:
E33-0401102-MC2
PAAD06015SL-N372
PAAD06015SL-N389
PAAD06015SL-N404
MSI MS-1799
MSI GE72 7RD Apache
MSI GE72 7RE Apache Pro
MSI GF72 7RD
MSI GF72 7RE
MSI GL72 7RD
MSI GL72 7RDX
MSI GL72 7REX
MSI GL72M 7RDX
MSI GL72M 7REX
MSI GP72 7RD Leopard
MSI GP72 7RDX Leopard
MSI GP72 7RE Leopard Pro
MSI GP72 7REX Leopard Pro
MSI GP72M 7RDX Leopard
MSI GP72M 7REX Leopard Pro
MSI GV72 7RD
MSI GV72 7RE
MSI PE70 7RD
MSI PE72 7RD
MSI PE72 7RE
GPU FAN for MSI GE72 GP72 GL72 GF72 GV72 PE70 PE72 original MS-179B MS-1799 4pin – a premium replacement cooling fan for laptops, designed to maintain optimal thermal performance.
Key specifications:
Compatibility: Direct replacement for . Confirm the screw hole positions and fan dimensions match your chassis.
Installation tip: Clean the CPU/GPU surface and apply fresh thermal paste if the new unit includes a heatsink. Secure screws evenly.
Warranty & Support: All products come with a 7‑day return policy and free technical support. If you have any compatibility questions, contact our team at info@pcspare.com.
SKU: LT-16852 | Last updated: 2026-10-24 14:01:18
How to verify: Open your laptop and look at the fan location – CPU fans are usually near the centre/top of the motherboard, while GPU fans are near the graphics chip (often on the right side). Check the part number on your original fan – it often indicates CPU or GPU designation (e.g., "CPU_FAN" or "GPU_FAN").
If you are unsure, send us a photo of your original fan and we can confirm the type for you.
If any specification is not shown, refer to the product pictures or contact our support.
Best practice: Place your original fan next to the product photos and compare every detail – screw hole locations, clip positions, and the shape of the fan housing. If you are unsure, measure your original fan with a ruler and share the dimensions with us.
Important: When transferring the heatsink, clean the thermal paste from both the heatsink and CPU/GPU surfaces, and apply fresh thermal paste before reassembly.
If you are unsure, send us a photo of your original assembly – we can confirm if this fan is compatible with your heatsink.
Pro tip: Some laptop manufacturers use multiple fan suppliers – Dell, HP, and Lenovo often use different fan PNs for the same model. If your original fan has a different PN, it may still be a functional replacement. When in doubt, send us a photo of your original fan's PN sticker along with your laptop model, and we will confirm compatibility.
Accessing the fan requires removing the bottom cover (D Cover) and sometimes the heatsink assembly (if the fan is attached to it). Some models require removing the motherboard to access the fan from the underside.
Always consult your laptop's service manual for model‑specific disassembly instructions.
Connection steps:
Important: If you are replacing a 4‑pin fan with a 3‑pin fan (or vice versa), the system may still work but speed control may differ. The motherboard will typically run a 3‑pin fan at full speed if it expects a PWM signal.
If your connector has the same number of pins but the plug shape looks different, some manufacturers use proprietary connectors – in rare cases, you may need to repin or use an adapter.
Note: Fan replacement involves handling thermal paste and delicate components. Follow these steps carefully:
Common mistakes to avoid:
If you are not comfortable with thermal paste application, we recommend professional installation.
Critical precautions:
Troubleshooting after installation:
If the problem persists: The motherboard's fan controller may be faulty, or the new fan may be defective – contact our support with details and we will help diagnose.
How to check fan RPM:
Normal RPM ranges (typical values):
What if the RPM is out of range?
Important: RPM readings are approximate – different fan models have different speed ranges. The key is that the fan responds to load changes and keeps the system temperature under control.
If your new fan's RPM is significantly different from the original, check that the pin configuration (2/3/4‑pin) matches the motherboard header.