NV173FHM-NX4 LCD screen panel

Q: What are the resolution and refresh rate of this screen?

Resolution: 1920(RGB)×1080, 16:9, FHD | Refresh Rate: 144HZ . Important considerations: Your laptop's graphics chip (GPU) must support this resolution and refresh rate. For example, 4K (3840x2160) requires a GPU with DisplayPort 1.2 or higher, and the LCD cable must have sufficient bandwidth (typically 40‑pin eDP). If your original screen was 1366x768 and you install a 1920x1080 panel, the system may work but the BIOS/EDID must recognise the new resolution – some older laptops are locked to the original resolution. High refresh rates (e.g., 144Hz) require a compatible cable and graphics output – ensure your laptop supports it. If you are upgrading to a higher resolution, we recommend checking your laptop's service manual or online forums for confirmed compatibility.

Q: What interface does this screen use, and what are the connector details?

Common interface types for reference: eDP 30 pin, Narrow: Width 0.67 inch (17mm), Pitch 0.4mm – common in ultra‑thin laptops. eDP 30 pin, Standard: Width 0.75 inch (19mm), Pitch 0.5mm – common in standard 14″–15.6″ models. eDP 40 pin, Narrow: Width 0.79 inch (20mm) or 0.83 inch (21mm), Pitch 0.4mm – used for 4K and high‑refresh panels. eDP 40 pin, Standard: Width 1.0 inch (25mm), Pitch 0.5mm – used in larger gaming laptops. LVDS 40 pin: Width 1.0 inch (25mm), Pitch 0.5mm – older interface, limited bandwidth. How to verify: Check the connector on your original screen – look for printed labels (e.g., "30P 0.4mm") or measure with a ruler. Compare with our product photos. If you are unsure, send us a clear photo of your original screen's connector – we can match it for you.

Q: What is the physical size of this screen?

Screen size: 17.3 (measured diagonally). Important: Even a 0.1‑inch difference can make the panel not fit in your bezel or the mounting holes may not align. Always measure your current screen's active area (visible portion) and outer dimensions (including the mounting tabs). Additionally, check the aspect ratio – most modern laptops use 16:9, but some use 16:10 (which is slightly taller). A 16:10 screen in a 16:9 bezel will not fit physically, and vice versa. How to measure: Remove the screen from the laptop and measure the diagonal of the active area (from corner to corner). Also measure the width and height of the entire panel (including the metal frame). Compare these numbers with our product specifications.

Q: Is this a touchscreen?

Touch support: No . This is a standard (non‑touch) panel. It will work in any laptop that accepts a non‑touch screen. If your laptop originally had a touchscreen, installing this non‑touch panel will result in lost touch functionality (but the display will still work). You may also need to use a non‑touch LCD cable.

Q: What is the grade/condition of this screen?

Grade: Grade A+ . Understanding LCD grades: Grade A+ (New): Brand new, flawless panel, zero dead pixels, uniform brightness – the highest quality. Grade A (New compatible): New, but may have minor cosmetic variations (e.g., slightly different backlight uniformity) – rarely noticeable. Grade B (Used/Refurbished): May have a few ( We ship all screens in the grade stated on the product page. All screens are tested for functionality – no lines, no flickering, and backlight is working. If you require a specific grade, please check the product description or contact us before ordering.

Q: Does this screen have any dead pixels or defects?

All our LCD screens are strictly tested before shipping. They are guaranteed to be free of dead pixels, bright dots, and lines at the time of shipment. What to do if you find defects after installation: Check if the issue is caused by a loose cable – reseat the LCD cable on both ends. Test the screen on another compatible laptop (if possible) to isolate the issue. If the defects are clearly on the panel (e.g., a cluster of dead pixels or a visible scratch), contact our support within 7 days with photos – we will arrange a replacement or refund. Our warranty covers manufacturing defects only – physical damage during installation is not covered.

Q: Where is the screen physically located, and how is it attached?

The LCD screen is located inside the display lid (A Cover + B Cover) of the laptop. It is attached as follows: To the A Cover (top lid): The screen is usually screwed onto the A Cover using 4‑8 small screws around the edges. Some models use adhesive tape or a metal frame instead of screws. Behind the B Cover (bezel): The bezel covers the front of the screen – it must be removed first to access the screen. The LCD cable connects from the back of the screen (or bottom edge) to the motherboard, passing through the hinge. The screen also has a backlight cable (sometimes integrated with the main cable) that supplies power to the LED backlight. Accessing the screen requires removing the bezel – some models also require removing the entire display assembly (lid) from the base to avoid damaging cables.

Q: How do I connect the LCD cable to the screen and motherboard?

The connection involves two ends: Screen end: The cable plugs into a connector on the back of the LCD panel (or at the bottom edge). This is typically a ZIF (Zero Insertion Force) connector. To connect: Flip up the small locking tab on the screen connector. Insert the cable with the gold contacts facing up (toward the tab) – the cable is often marked with a blue or red stripe to indicate pin 1. Press the tab down firmly to lock. Motherboard end: The cable plugs into a header on the system board, usually labelled LCD , LVDS , eDP , or J_LCD . The procedure is the same – lift the ZIF tab, insert the cable correctly, and lock. Critical: The cable must be inserted all the way – if it is not fully seated, you will get a partial display or no image. Do not force the cable; if it does not go in easily, check the orientation. Always disconnect the battery before connecting or disconnecting the LCD cable to avoid short circuits.

ID: PCS-8276 Type: WLED display Size: 17.3 Model/PN: NV173FHM-NX4 Refresh Rate: 144HZ Resolution: 1920(RGB)×1080, 16:9, FHD Interface: EDP 40 pin Connector width: 25mm Pin pitch: 0.5mm Condition: Grade A+

Availability: In Stock

‌EUR € 45.00

Qty

Bulk Quote

Shipping Estimate ship from China Click to detect

DDP - Delivered Duty Paid (Remote not included) / DDU - Delivered Duty Unpaid

Calculate Shipping

Guaranteed to fit your Display Panel NV173FHM-NX4
Free step-by-step repair guide File
Tracked shipping & easy returns

Complete specifications for reference:
MSI Cyborg 17 B13W Acer Nitro 5 AN517-41 Series AN517-42 Series AN517-51 Series AN517-52 Series AN517-53 Series AN517-54 Series AN517-55 Series Acer Predator Helios 300 / 700 PH317-53 Series PH317-54 Series PH317-55 Series PH317-56 Series PH717-71 Series PH717-72 Series ASUS TUF Gaming A17 FA706 Series FA706I FA706IC FA706IE FA706IH FA706IHR FA706II FA706IU FA706Q FA706QE FA706QM FA706QR FA707 Series FA707R FA707RC FA707RE FA707RM FA707RR FA707RW FA707X FA707XI FA707XU ASUS TUF Gaming F17 / FX FX705 Series FX705G FX705GE FX705GM FX706 Series FX706H FX706HC FX706HCB FX706HE FX706HF FX706HM FX706I FX706II FX706IU FX706L FX706LI FX707 Series FX707V FX707VU FX707VV FX707Z FX707ZC FX707ZC4 FX707ZE FX707ZM FX707ZR FX707ZU FX707ZV FX765GM Series FX766 Series FX766H FX766HC FX766HCB FX766L FX766LI ASUS ROG Strix / Scar / Zephyrus G703 Series G703G G703GX G703GXR G712 Series G712L G712LU G712LV G712LW G712LWS G713 Series G713I G713IC G713IE G713IH G713IM G713IR G713P G713PI G713PU G713PV G713Q G713QC G713QE G713QM G713QR G713R G713RC G715 Series G715G G715GV G715GW G731 Series G731G G731GU G731GV G731GW G732 Series G732L G732LV G732LW GL704 Series GL704G GL704GM GL704GV GL704GW GL731 Series GL731G GL731GU GL731GV GL731GW GX701 Series GX701G GX701GV GX701GVR GX701GW GX701GWR GX701GX GX701GXR GX701L GX701LV GX701LW GX701LWS GX701LX GX701LXS GX735 Series GX735G GX735GV GX735GVR GX735GW GX735GWR GX735GX GX735GXR GX735L GX735LW GX735LWS GX735LX GX735LXS GZ700 Series GZ700G GZ700GX GZ755 Series GZ755G GZ755GX GZ755GXR GZ775 Series GZ775G GZ775GX ASUS PX Series PX705 Series PX705G PX705GM PX707 Series PX707Z PX707ZM PX712 Series PX712L PX712LU PX713 Series PX713Q PX713QE PX713QM PX731 Series PX731G PX731GU PX731GV PX731GW ASUS TUF705 / TUF706 / TUF707 / TUF766 TUF705 Series TUF705G TUF705GE TUF705GM TUF706 Series TUF706H TUF706HC TUF706HCB TUF706HCNT TUF706HE TUF706HM TUF706I TUF706IC TUF706ICB TUF706IE TUF706IH TUF706IHNT TUF706IHR TUF706II TUF706IU TUF706L TUF706LI TUF706Q TUF706QE TUF707 Series TUF707R TUF707RC TUF707RE TUF707RR TUF707Z TUF707ZC TUF707ZM TUF707ZV4 TUF756 Series TUF756G TUF756GM TUF765 Series TUF765G TUF765GE TUF765GM TUF766 Series TUF766H TUF766HC TUF766HCB TUF766HE TUF766HEB TUF766HM TUF766I TUF766IH TUF766II TUF766IU TUF766L TUF766LI TUF766Q TUF766QM TUF766QR Gigabyte AORUS 17G KD 17G KD-72ES325SH 17G KD-72ES325SD 17G YD 17G YD-73ES345SH 17 YE5 17 YE5-74ES544SH 17X YD 17X YD-94ES367SP 17G XD 17G XD-73ES345SH HP Omen 17-CB 17-CB Series CBxxx Series CB000 Series CB0001ns CB0003ns CB0004ns CB0005ns CB0006ns CB0007ns CB0008ns CB0009ns CB0010ns CB0011ns CB0012ns CB0013ns CB0014ns CB0015ns CB0016ns CB0017ns CB0018ns CB0019ns CB0020ns CB0021ns CB0022ns CB0023ns CB0024ns CB0026ns Lenovo Legion 5-17 5-17ACH6 Series 5-17ACH6 (82K0) Series 5-17ACH6H Series 5-17ACH6H (82JY) Series 5-17ARH05H Series 5-17ARH05H (82GN) Series 5-17IMH05 Series 5-17IMH05 (82B3) Series 5-17IMH05H Series 5-17IMH05H (81Y8) Series 5-17ITH6 Series 5-17ITH6 (82JN) Series 5-17ITH6H Series 5-17ITH6H (82JM) Series Lenovo Legion Y540-17 Y540-17IRH Series Y540-17IRH (80Q4) Series Y540-17IRH (81Q400ERSP) Y540-17IRH (81Q4005ESP) Y540-17IRH (81Q4005FSP) Y540-17IRH (81Q4005GSP) Y540-17IRH (81T3) Series Y540-17IRH (81T30032SP) Y540-17IRH (81T30033SP) Y540-17IRH (81T30037SP) Y540-17IRH (81T30038SP) MSI Alpha / Bravo / Creator Alpha 17 B5EE Series Alpha 17 B5EEK Series Bravo 17 A4DDK Series Bravo 17 A4DDK-002XES Bravo 17 A4DDR Series Bravo 17 A4DDR-009 MS-17FK Creator 17 A10SE Series Creator 17 A10SF Series Creator 17 A10SFS Series Creator 17 A10SGS Series Creator 17M A9SD Series Creator 17M A9SE Series MSI Raider / Katana / Pulse / Titan GE75 Series GE75 8RE Raider Series GE75-8RE Raider Series GE75 8RF Raider Series GE75-8RF Raider Series GE75 8SE Raider Series GE75-8SE Raider Series GE75 8SF Raider Series GE75-8SF Raider Series GE75 8SG Raider Series GE75-8SG Raider Series GE75 9SE Raider Series GE75-9SF Raider Series GE75 9SG Raider Series GE75 9SX Raider Series GF75 Series MS-17F1 MS-17F2 MS-17F3 MS-17F4 GF76 Series GF76 11UC Series Katana GF76 11UC-080ES GF76 11UD Series Katana GF76 11UD-079XES Katana GF76 11UD-628XES GF76 11UE Series Katana GF76 11UE-056XES Katana GF76 11UE-057XES GF76 11UG Series GF76 12UC Series Katana GF76 12UC-037ES GF76 12UD Series Katana GF76 12UD-035ES Katana GF76 12UD-036XES GF76 12UE Series Katana GF76 12UE-058XES GL75 Series GL75 9SDK-Series GL75 9SDK-268XES GL75 9SEK Series GL75 9SEK-074XES GL75 10SDK Series GL75 10SDK-041XES GL75 10SEK Series GL75 10SEK-039ES GL75 10SEK-261XES GL75 10SEK-276ES GL75 10SFK Series GL75 10SFK-060XES GL76 Series GL76 11UEK Series Pulse GL76 11UEK-038XES Pulse GL76 11UEK-053ES Pulse GL76 11UEK-055XES GP75 Series GP75 9SD Series GP75-9SD Series GP75 9SE Series GP75-9SE Series GP75 9SF Series GP75-9SF Series GT75 8SG Titan Series GT75-8SG Titan Series GT75 10SF Titan Series GT75-10SF Titan Series Prestige P75 Series P75 9SD Creator Series P75-9SD Creator Series P75 9SE Creator Series P75-9SE Creator Series P75 9SF Creator Series

Description

Product Description

NV173FHM-NX4 LCD screen panel – a high‑quality LCD panel designed for laptops, delivering crisp visuals and accurate color reproduction.

Key specifications:

Screen Size: 17.3 – measured diagonally; verify it matches your bezel cutout.
Resolution: 1920(RGB)×1080, 16:9, FHD – ensure your GPU supports this resolution (e.g., 4K requires eDP 40‑pin).
Refresh Rate: 144HZ – higher refresh rates (≥120Hz) require compatible cable and GPU.
Interface: EDP 40 pin, Width: 1.0 inch (25mm), Pitch: 0.5mm – connector type and pin count (e.g., eDP 30‑pin 0.5mm).
Touchscreen: No – if Yes, your motherboard and cable must support touch digitizer.
Condition: Grade A+ – condition of the panel.
Model/PN: NV173FHM-NX4 – compare with the part number on your original screen.

Compatibility: Guaranteed fit for . Double‑check the connector width and pitch before installation.

Installation tip: Handle the screen by the edges, avoid touching the glass, and route the cable carefully through the hinge to prevent pinching.

Warranty & Support: All products come with a 7‑day return policy and free technical support. If you have any compatibility questions, contact our team at info@pcspare.com.

SKU: LT-8276 | Last updated: 2026-09-20 00:35:46

Internal Structure Diagram Search and view the internal structure of this part

LCD Panel — Layer Structure

Frequently Asked Questions & Solutions

What are the resolution and refresh rate of this screen?

Resolution: 1920(RGB)×1080, 16:9, FHD | Refresh Rate: 144HZ.

Important considerations:

Your laptop's graphics chip (GPU) must support this resolution and refresh rate. For example, 4K (3840x2160) requires a GPU with DisplayPort 1.2 or higher, and the LCD cable must have sufficient bandwidth (typically 40‑pin eDP).
If your original screen was 1366x768 and you install a 1920x1080 panel, the system may work but the BIOS/EDID must recognise the new resolution – some older laptops are locked to the original resolution.
High refresh rates (e.g., 144Hz) require a compatible cable and graphics output – ensure your laptop supports it.

If you are upgrading to a higher resolution, we recommend checking your laptop's service manual or online forums for confirmed compatibility.

What interface does this screen use, and what are the connector details?

Common interface types for reference:

eDP 30 pin, Narrow: Width 0.67 inch (17mm), Pitch 0.4mm – common in ultra‑thin laptops.
eDP 30 pin, Standard: Width 0.75 inch (19mm), Pitch 0.5mm – common in standard 14″–15.6″ models.
eDP 40 pin, Narrow: Width 0.79 inch (20mm) or 0.83 inch (21mm), Pitch 0.4mm – used for 4K and high‑refresh panels.
eDP 40 pin, Standard: Width 1.0 inch (25mm), Pitch 0.5mm – used in larger gaming laptops.
LVDS 40 pin: Width 1.0 inch (25mm), Pitch 0.5mm – older interface, limited bandwidth.

How to verify: Check the connector on your original screen – look for printed labels (e.g., "30P 0.4mm") or measure with a ruler. Compare with our product photos.

If you are unsure, send us a clear photo of your original screen's connector – we can match it for you.

What is the physical size of this screen?

Screen size: 17.3 (measured diagonally).

Important: Even a 0.1‑inch difference can make the panel not fit in your bezel or the mounting holes may not align. Always measure your current screen's active area (visible portion) and outer dimensions (including the mounting tabs).

Additionally, check the aspect ratio – most modern laptops use 16:9, but some use 16:10 (which is slightly taller). A 16:10 screen in a 16:9 bezel will not fit physically, and vice versa.

How to measure: Remove the screen from the laptop and measure the diagonal of the active area (from corner to corner). Also measure the width and height of the entire panel (including the metal frame). Compare these numbers with our product specifications.

Is this a touchscreen?

Touch support: No. This is a standard (non‑touch) panel.

It will work in any laptop that accepts a non‑touch screen. If your laptop originally had a touchscreen, installing this non‑touch panel will result in lost touch functionality (but the display will still work). You may also need to use a non‑touch LCD cable.

What is the grade/condition of this screen?

Grade: Grade A+.

Understanding LCD grades:

Grade A+ (New): Brand new, flawless panel, zero dead pixels, uniform brightness – the highest quality.
Grade A (New compatible): New, but may have minor cosmetic variations (e.g., slightly different backlight uniformity) – rarely noticeable.
Grade B (Used/Refurbished): May have a few (<5) dead pixels or minor scratches that do not affect performance – suitable for budget repairs.

We ship all screens in the grade stated on the product page. All screens are tested for functionality – no lines, no flickering, and backlight is working.

If you require a specific grade, please check the product description or contact us before ordering.

Does this screen have any dead pixels or defects?

All our LCD screens are strictly tested before shipping. They are guaranteed to be free of dead pixels, bright dots, and lines at the time of shipment.

What to do if you find defects after installation:

Check if the issue is caused by a loose cable – reseat the LCD cable on both ends.
Test the screen on another compatible laptop (if possible) to isolate the issue.
If the defects are clearly on the panel (e.g., a cluster of dead pixels or a visible scratch), contact our support within 7 days with photos – we will arrange a replacement or refund.

Our warranty covers manufacturing defects only – physical damage during installation is not covered.

Where is the screen physically located, and how is it attached?

The LCD screen is located inside the display lid (A Cover + B Cover) of the laptop. It is attached as follows:

To the A Cover (top lid): The screen is usually screwed onto the A Cover using 4‑8 small screws around the edges. Some models use adhesive tape or a metal frame instead of screws.
Behind the B Cover (bezel): The bezel covers the front of the screen – it must be removed first to access the screen.
The LCD cable connects from the back of the screen (or bottom edge) to the motherboard, passing through the hinge.
The screen also has a backlight cable (sometimes integrated with the main cable) that supplies power to the LED backlight.

Accessing the screen requires removing the bezel – some models also require removing the entire display assembly (lid) from the base to avoid damaging cables.

How do I connect the LCD cable to the screen and motherboard?

The connection involves two ends:

Screen end: The cable plugs into a connector on the back of the LCD panel (or at the bottom edge). This is typically a ZIF (Zero Insertion Force) connector. To connect:
- Flip up the small locking tab on the screen connector.
- Insert the cable with the gold contacts facing up (toward the tab) – the cable is often marked with a blue or red stripe to indicate pin 1.
- Press the tab down firmly to lock.
Motherboard end: The cable plugs into a header on the system board, usually labelled LCD, LVDS, eDP, or J_LCD. The procedure is the same – lift the ZIF tab, insert the cable correctly, and lock.

Critical: The cable must be inserted all the way – if it is not fully seated, you will get a partial display or no image. Do not force the cable; if it does not go in easily, check the orientation.

Always disconnect the battery before connecting or disconnecting the LCD cable to avoid short circuits.

How to replace the LCD screen step by step?

Note: This is a delicate operation – proceed with caution. If you are not confident, consider using a professional repair service.

Preparation: Power off the laptop, disconnect the AC adapter, and remove the battery (if removable). Work on a clean, soft surface.
Remove the bezel (B Cover):
- Use a plastic spudger or guitar pick to gently pry the bezel off – start from the inner edge (near the screen) and work your way around.
- Some bezels are secured with adhesive – apply low heat (hair dryer) to soften the glue.
- Be careful not to bend or crack the bezel – it is often thin and fragile.
Disconnect the old screen:
- Locate the LCD cable connector on the back of the screen (or at the bottom). Release the ZIF tab and gently pull the cable out.
- If there is a separate backlight cable, disconnect it as well.
- Remove the mounting screws (usually 4‑6) securing the screen to the A Cover.
- Lift the screen out carefully – avoid flexing it.
Install the new screen:
- Place the new screen in the same position – align the screw holes.
- Insert and tighten the mounting screws evenly – do not overtighten.
- Connect the LCD cable – insert it fully into the ZIF connector and lock the tab. Ensure the cable is not twisted or pinched.
- If your screen has a separate backlight cable, connect it as well.
Reattach the bezel:
- Press the bezel back into place – start from one corner and work around, ensuring all clips snap.
- If adhesive was used, apply new adhesive tape or use the original adhesive (if still sticky).
Test before full reassembly:
- Reconnect the battery and power on the laptop – check for proper display (no lines, flickering, or dead pixels).
- Test the brightness adjustment and if touchscreen, test touch functionality.
If everything works, power off, disconnect the battery, and reassemble any remaining covers.

Common pitfalls to avoid:

Forgetting to connect the cable before mounting the screen – you will need to redo the steps.
Pinching the LCD cable in the hinge area – route it carefully exactly as the original.
Using screws that are too long – they can damage the screen or the A Cover.
Not removing all old adhesive – this can cause the bezel to sit unevenly.

Watch our installation video or consult your laptop's service manual for model‑specific details.

What precautions should I take, and what if the screen does not work after installation?

Critical precautions:

Always disconnect the battery before handling any screen or cable – the LCD backlight can carry high voltage (up to 40V) and can damage the inverter or GPU.
Handle the screen by the edges – avoid touching the glass surface or the gold contacts on the cable.
Never bend or flex the screen – the glass can crack easily.
Use ESD protection – wear an anti‑static wrist strap or touch a grounded metal object before touching components.
Do not over‑tighten screws – screen frames are delicate; snug is enough.
Keep the screen clean – any dust or fingerprints on the inner surface will be visible when the backlight is on.

Troubleshooting – what if the screen does not work after installation?

No display (black screen):
- Check that the LCD cable is fully inserted and locked on both the screen and motherboard ends.
- Verify the laptop is powered on (listen for fan or look for caps lock light).
- Test with an external monitor to confirm the laptop is outputting video – if external works, the issue is with the screen or cable.
- Inspect the cable for damage – a pinched cable can break internal traces.
Backlight is on but no image (blank white/grey screen):
- This usually indicates the video data lines are not connected – reseat the cable, check for bent pins on the connector.
- Verify that the screen is compatible with your laptop's interface (e.g., eDP vs LVDS).
Flickering or intermittent display:
- Check cable routing – it may be pinched in the hinge area.
- Ensure the cable is not pulled taut – there should be a slight slack.
Lines, artifacts, or distorted colours:
- Reseat the cable – sometimes a poor connection causes signal noise.
- If lines persist, the screen may be defective – contact support.
Touch not working (for touch screens):
- Confirm the digitizer cable (if separate) is connected.
- Install the correct touch driver – some laptops need a specific driver for the new panel.
- Check BIOS settings – some laptops have a touch enable/disable option.
Brightness adjustment not working:
- Ensure the backlight cable (if separate) is connected.
- Check if the laptop’s brightness keys are functioning – if not, try reinstalling the graphics driver.
Screen is too dark or uneven backlight:
- This could be a backlight issue – ensure the connector is fully seated.
- If the screen is a different model, the brightness levels may be interpreted differently – adjust in the OS.

If you have tried all the above and the problem persists: Contact our support with photos of the screen issue and your laptop model – we will help diagnose and arrange a replacement if necessary.

New arrive

Bottom Case D Cover for HP ZBook X G1i / G2i 16 inch & Power G12 / G13

‌EUR € 19.80

LCD Rear Top Lid Back Cover A Case for HP ZBook X G1i / G2i 16 inch & Power G12 / G13

‌EUR € 26.10

Backlit US Keyboard Palmrest for HP ZBook X G1i / G2i 16 inch & Power G12 / G13 – AI Version

‌EUR € 45.90

Black US Keyboard Compatible with Microsoft Surface Laptop 6 13.5" 2033 / 15" 2035

‌EUR € 25.20