N160JCE-ELL LCD screen panel

Q: What are the resolution and refresh rate of this screen?

Resolution: 1920(RGB)×1080, 16:9, FHD | Refresh Rate: 60HZ . Important considerations: Your laptop's graphics chip (GPU) must support this resolution and refresh rate. For example, 4K (3840x2160) requires a GPU with DisplayPort 1.2 or higher, and the LCD cable must have sufficient bandwidth (typically 40‑pin eDP). If your original screen was 1366x768 and you install a 1920x1080 panel, the system may work but the BIOS/EDID must recognise the new resolution – some older laptops are locked to the original resolution. High refresh rates (e.g., 144Hz) require a compatible cable and graphics output – ensure your laptop supports it. If you are upgrading to a higher resolution, we recommend checking your laptop's service manual or online forums for confirmed compatibility.

Q: What interface does this screen use, and what are the connector details?

Common interface types for reference: eDP 30 pin, Narrow: Width 0.67 inch (17mm), Pitch 0.4mm – common in ultra‑thin laptops. eDP 30 pin, Standard: Width 0.75 inch (19mm), Pitch 0.5mm – common in standard 14″–15.6″ models. eDP 40 pin, Narrow: Width 0.79 inch (20mm) or 0.83 inch (21mm), Pitch 0.4mm – used for 4K and high‑refresh panels. eDP 40 pin, Standard: Width 1.0 inch (25mm), Pitch 0.5mm – used in larger gaming laptops. LVDS 40 pin: Width 1.0 inch (25mm), Pitch 0.5mm – older interface, limited bandwidth. How to verify: Check the connector on your original screen – look for printed labels (e.g., "30P 0.4mm") or measure with a ruler. Compare with our product photos. If you are unsure, send us a clear photo of your original screen's connector – we can match it for you.

Q: What is the physical size of this screen?

Screen size: 16.0 (measured diagonally). Important: Even a 0.1‑inch difference can make the panel not fit in your bezel or the mounting holes may not align. Always measure your current screen's active area (visible portion) and outer dimensions (including the mounting tabs). Additionally, check the aspect ratio – most modern laptops use 16:9, but some use 16:10 (which is slightly taller). A 16:10 screen in a 16:9 bezel will not fit physically, and vice versa. How to measure: Remove the screen from the laptop and measure the diagonal of the active area (from corner to corner). Also measure the width and height of the entire panel (including the metal frame). Compare these numbers with our product specifications.

Q: Is this a touchscreen?

Touch support: No . This is a standard (non‑touch) panel. It will work in any laptop that accepts a non‑touch screen. If your laptop originally had a touchscreen, installing this non‑touch panel will result in lost touch functionality (but the display will still work). You may also need to use a non‑touch LCD cable.

Q: What is the grade/condition of this screen?

Grade: New Grade A+ . Understanding LCD grades: Grade A+ (New): Brand new, flawless panel, zero dead pixels, uniform brightness – the highest quality. Grade A (New compatible): New, but may have minor cosmetic variations (e.g., slightly different backlight uniformity) – rarely noticeable. Grade B (Used/Refurbished): May have a few ( We ship all screens in the grade stated on the product page. All screens are tested for functionality – no lines, no flickering, and backlight is working. If you require a specific grade, please check the product description or contact us before ordering.

Q: Does this screen have any dead pixels or defects?

All our LCD screens are strictly tested before shipping. They are guaranteed to be free of dead pixels, bright dots, and lines at the time of shipment. What to do if you find defects after installation: Check if the issue is caused by a loose cable – reseat the LCD cable on both ends. Test the screen on another compatible laptop (if possible) to isolate the issue. If the defects are clearly on the panel (e.g., a cluster of dead pixels or a visible scratch), contact our support within 7 days with photos – we will arrange a replacement or refund. Our warranty covers manufacturing defects only – physical damage during installation is not covered.

Q: Where is the screen physically located, and how is it attached?

The LCD screen is located inside the display lid (A Cover + B Cover) of the laptop. It is attached as follows: To the A Cover (top lid): The screen is usually screwed onto the A Cover using 4‑8 small screws around the edges. Some models use adhesive tape or a metal frame instead of screws. Behind the B Cover (bezel): The bezel covers the front of the screen – it must be removed first to access the screen. The LCD cable connects from the back of the screen (or bottom edge) to the motherboard, passing through the hinge. The screen also has a backlight cable (sometimes integrated with the main cable) that supplies power to the LED backlight. Accessing the screen requires removing the bezel – some models also require removing the entire display assembly (lid) from the base to avoid damaging cables.

Q: How do I connect the LCD cable to the screen and motherboard?

The connection involves two ends: Screen end: The cable plugs into a connector on the back of the LCD panel (or at the bottom edge). This is typically a ZIF (Zero Insertion Force) connector. To connect: Flip up the small locking tab on the screen connector. Insert the cable with the gold contacts facing up (toward the tab) – the cable is often marked with a blue or red stripe to indicate pin 1. Press the tab down firmly to lock. Motherboard end: The cable plugs into a header on the system board, usually labelled LCD , LVDS , eDP , or J_LCD . The procedure is the same – lift the ZIF tab, insert the cable correctly, and lock. Critical: The cable must be inserted all the way – if it is not fully seated, you will get a partial display or no image. Do not force the cable; if it does not go in easily, check the orientation. Always disconnect the battery before connecting or disconnecting the LCD cable to avoid short circuits.

ID: PCS-10027046 Type: WLED display Size: 16.0 Model/PN: N160JCE-ELL Refresh Rate: 60HZ Resolution: 1920(RGB)×1080, 16:9, FHD Interface: EDP 30 pin Connector width: 19mm Pin pitch: 0.5mm Condition: New Grade A+

Availability: In Stock

‌EUR € 47.70

Qty

Bulk Quote

Shipping Estimate ship from China Click to detect

DDP - Delivered Duty Paid (Remote not included) / DDU - Delivered Duty Unpaid

Calculate Shipping

Guaranteed to fit your Display Panel N160JCE-ELL
Free step-by-step repair guide File
Tracked shipping & easy returns

Complete specifications for reference:
Asus ASUS ExpertBook B5 Series ASUS ExpertBook B5602 ASUS ExpertBook B5602C ASUS ExpertBook B5602CB ASUS ExpertBook B5602CBA ASUS ExpertBook B5602CBN ASUS ExpertBook B5602CV ASUS ExpertBook B5602CVA ASUS VivoBook 16 Series ASUS VivoBook 16 D1603 ASUS VivoBook 16 D1603Q ASUS VivoBook 16 D1603QA ASUS VivoBook 16 D1605 ASUS VivoBook 16 D1605Y ASUS VivoBook 16 D1605YA ASUS VivoBook 16 F1603 ASUS VivoBook 16 F1603Z ASUS VivoBook 16 F1603ZA ASUS VivoBook 16 F1605 ASUS VivoBook 16 F1605P ASUS VivoBook 16 F1605PA ASUS VivoBook 16X Series ASUS VivoBook 16X K3604 ASUS VivoBook 16X K3604V ASUS VivoBook 16X K3604VA ASUS VivoBook 16X K3604Z ASUS VivoBook 16X K3604ZA ASUS VivoBook 16X K3605 ASUS VivoBook 16X K3605V ASUS VivoBook 16X K3605VC ASUS VivoBook 16X K3605VU ASUS VivoBook 16X K3605Z ASUS VivoBook 16X K3605ZC ASUS VivoBook 16X K3605ZF ASUS VivoBook 16X K3605ZU ASUS VivoBook 16X K3605ZV ASUS VivoBook Pro 16 Series ASUS VivoBook Pro 16 K6602 ASUS VivoBook Pro 16 K6602H ASUS VivoBook Pro 16 K6602HC ASUS VivoBook Pro 16 K6602HE ASUS VivoBook Pro 16 K6602Z ASUS VivoBook Pro 16 K6602ZC ASUS VivoBook Pro 16 K6602ZE ASUS VivoBook 16X Series ASUS VivoBook 16X M1603 ASUS VivoBook 16X M1603I ASUS VivoBook 16X M1603IA ASUS VivoBook 16X M1603Q ASUS VivoBook 16X M1603QA ASUS VivoBook 16X M1605 ASUS VivoBook 16X M1605X ASUS VivoBook 16X M1605XA ASUS VivoBook 16X M1605Y ASUS VivoBook 16X M1605YA ASUS VivoBook S 16X Series ASUS VivoBook S 16X M5602 ASUS VivoBook S 16X M5602Q ASUS VivoBook S 16X M5602QA ASUS VivoBook 16 Series ASUS VivoBook 16 N6602 ASUS VivoBook 16 N6602Z ASUS VivoBook 16 N6602ZE ASUS VivoBook 16 P1600 ASUS VivoBook 16 P1600E ASUS VivoBook 16 P1600EA ASUS VivoBook 16 R1600 ASUS VivoBook 16 R1600P ASUS VivoBook 16 R1600PA ASUS VivoBook 16 R1605 ASUS VivoBook 16 R1605P ASUS VivoBook 16 R1605PA ASUS VivoBook 16X Series ASUS VivoBook 16X S1603 ASUS VivoBook 16X S1603Q ASUS VivoBook 16X S1603QA ASUS VivoBook 16X S1605 ASUS VivoBook 16X S1605P ASUS VivoBook 16X S1605PA ASUS VivoBook S 16X Series ASUS VivoBook S 16X S5602 ASUS VivoBook S 16X S5602Z ASUS VivoBook S 16X S5602ZA ASUS VivoBook 16X Series ASUS VivoBook 16X X1603 ASUS VivoBook 16X X1603Z ASUS VivoBook 16X X1603ZA ASUS VivoBook 16X X1605 ASUS VivoBook 16X X1605E ASUS VivoBook 16X X1605EA ASUS VivoBook 16X X1605P ASUS VivoBook 16X X1605PA ASUS VivoBook 16X X1605V ASUS VivoBook 16X X1605VA ASUS VivoBook 16X X1605Z ASUS VivoBook 16X X1605ZA ASUS VivoBook 16 F Series ASUS VivoBook 16 F1603 ASUS VivoBook 16 F1605 ASUS VivoBook 16 F1605E Lenovo Lenovo IdeaPad Slim 3-16ABR8 Series Lenovo IdeaPad Slim 3-16ABR8 (82XR) Series Lenovo IdeaPad Slim 3-16IAH8 Series Lenovo IdeaPad Slim 3-16IAH8 (83ES) Series Lenovo IdeaPad Slim 3-16IRH8 Series Lenovo IdeaPad Slim 3-16IRH8 (83EN) Series Lenovo IdeaPad Slim 3-16IRU8 Series Lenovo IdeaPad Slim 3-16IRU8 (82X8) Series Lenovo IdeaPad Slim 3-16IRU9 Series Lenovo IdeaPad Slim 3-16IRU9 (83E7) Series Lenovo IdeaPad Slim 5-16ABR8 Series Lenovo IdeaPad Slim 5-16ABR8 (82XG) Series Lenovo IdeaPad Slim 5-16IAH8 Series Lenovo IdeaPad Slim 5-16IAH8 (83BG) Series Lenovo IdeaPad Slim 5-16IRL8 Series Lenovo IdeaPad Slim 5-16IRL8 (82XF) Series Lenovo IdeaPad Slim 5-16IRU9 Series Lenovo IdeaPad Slim 5-16IRU9 (83FW) Series Lenovo ThinkBook 16 G6-ABP Series Lenovo ThinkBook 16 G6 ABP (21KK) Series Lenovo ThinkBook 16 G6-IRL Series Lenovo ThinkBook 16 G6 IRL (21KH) Series Lenovo ThinkBook 16 G7-ARP Series Lenovo ThinkBook 16 G7 ARP (21MW) Series Lenovo ThinkBook 16 G7-IML Series Lenovo ThinkBook 16 G7 IML (21MS) Series Lenovo 21KG Lenovo 21KG000PIX Lenovo 21KJ Lenovo 21MR Lenovo 21MR005SUS Lenovo 21MV Lenovo 21MV004HAU Lenovo 5CB1M48319 Lenovo 5CB1M48320 Lenovo 21SH Lenovo IAL Lenovo 21SK Lenovo 5C10S30899 Lenovo 450.0TE08.0003 Lenovo RGB Lenovo K3605VV Lenovo DDZJ2MLC420 Lenovo DDZJ2MLC410 Lenovo DDZJ2MLC310 Lenovo DDZJ2MLC210 Lenovo 5B30S19154 Lenovo GEN Lenovo 5CB1M48386

Description

Product Description

N160JCE-ELL LCD screen panel – a high‑quality LCD panel designed for laptops, delivering crisp visuals and accurate color reproduction.

Key specifications:

Screen Size: 16.0 – measured diagonally; verify it matches your bezel cutout.
Resolution: 1920(RGB)×1080, 16:9, FHD – ensure your GPU supports this resolution (e.g., 4K requires eDP 40‑pin).
Refresh Rate: 60HZ – higher refresh rates (≥120Hz) require compatible cable and GPU.
Interface: EDP 30 pin, Width: 0.75 inch (19mm), Pitch: 0.5mm – connector type and pin count (e.g., eDP 30‑pin 0.5mm).
Touchscreen: No – if Yes, your motherboard and cable must support touch digitizer.
Condition: New Grade A+ – condition of the panel.
Model/PN: N160JCE-ELL – compare with the part number on your original screen.

Compatibility: Guaranteed fit for . Double‑check the connector width and pitch before installation.

Installation tip: Handle the screen by the edges, avoid touching the glass, and route the cable carefully through the hinge to prevent pinching.

Warranty & Support: All products come with a 7‑day return policy and free technical support. If you have any compatibility questions, contact our team at info@pcspare.com.

SKU: LT-10027046 | Last updated: 2026-10-21 07:26:53

Internal Structure Diagram Search and view the internal structure of this part

LCD Panel — Layer Structure

Frequently Asked Questions & Solutions

What are the resolution and refresh rate of this screen?

Resolution: 1920(RGB)×1080, 16:9, FHD | Refresh Rate: 60HZ.

Important considerations:

Your laptop's graphics chip (GPU) must support this resolution and refresh rate. For example, 4K (3840x2160) requires a GPU with DisplayPort 1.2 or higher, and the LCD cable must have sufficient bandwidth (typically 40‑pin eDP).
If your original screen was 1366x768 and you install a 1920x1080 panel, the system may work but the BIOS/EDID must recognise the new resolution – some older laptops are locked to the original resolution.
High refresh rates (e.g., 144Hz) require a compatible cable and graphics output – ensure your laptop supports it.

If you are upgrading to a higher resolution, we recommend checking your laptop's service manual or online forums for confirmed compatibility.

What interface does this screen use, and what are the connector details?

Common interface types for reference:

eDP 30 pin, Narrow: Width 0.67 inch (17mm), Pitch 0.4mm – common in ultra‑thin laptops.
eDP 30 pin, Standard: Width 0.75 inch (19mm), Pitch 0.5mm – common in standard 14″–15.6″ models.
eDP 40 pin, Narrow: Width 0.79 inch (20mm) or 0.83 inch (21mm), Pitch 0.4mm – used for 4K and high‑refresh panels.
eDP 40 pin, Standard: Width 1.0 inch (25mm), Pitch 0.5mm – used in larger gaming laptops.
LVDS 40 pin: Width 1.0 inch (25mm), Pitch 0.5mm – older interface, limited bandwidth.

How to verify: Check the connector on your original screen – look for printed labels (e.g., "30P 0.4mm") or measure with a ruler. Compare with our product photos.

If you are unsure, send us a clear photo of your original screen's connector – we can match it for you.

What is the physical size of this screen?

Screen size: 16.0 (measured diagonally).

Important: Even a 0.1‑inch difference can make the panel not fit in your bezel or the mounting holes may not align. Always measure your current screen's active area (visible portion) and outer dimensions (including the mounting tabs).

Additionally, check the aspect ratio – most modern laptops use 16:9, but some use 16:10 (which is slightly taller). A 16:10 screen in a 16:9 bezel will not fit physically, and vice versa.

How to measure: Remove the screen from the laptop and measure the diagonal of the active area (from corner to corner). Also measure the width and height of the entire panel (including the metal frame). Compare these numbers with our product specifications.

Is this a touchscreen?

Touch support: No. This is a standard (non‑touch) panel.

It will work in any laptop that accepts a non‑touch screen. If your laptop originally had a touchscreen, installing this non‑touch panel will result in lost touch functionality (but the display will still work). You may also need to use a non‑touch LCD cable.

What is the grade/condition of this screen?

Grade: New Grade A+.

Understanding LCD grades:

Grade A+ (New): Brand new, flawless panel, zero dead pixels, uniform brightness – the highest quality.
Grade A (New compatible): New, but may have minor cosmetic variations (e.g., slightly different backlight uniformity) – rarely noticeable.
Grade B (Used/Refurbished): May have a few (<5) dead pixels or minor scratches that do not affect performance – suitable for budget repairs.

We ship all screens in the grade stated on the product page. All screens are tested for functionality – no lines, no flickering, and backlight is working.

If you require a specific grade, please check the product description or contact us before ordering.

Does this screen have any dead pixels or defects?

All our LCD screens are strictly tested before shipping. They are guaranteed to be free of dead pixels, bright dots, and lines at the time of shipment.

What to do if you find defects after installation:

Check if the issue is caused by a loose cable – reseat the LCD cable on both ends.
Test the screen on another compatible laptop (if possible) to isolate the issue.
If the defects are clearly on the panel (e.g., a cluster of dead pixels or a visible scratch), contact our support within 7 days with photos – we will arrange a replacement or refund.

Our warranty covers manufacturing defects only – physical damage during installation is not covered.

Where is the screen physically located, and how is it attached?

The LCD screen is located inside the display lid (A Cover + B Cover) of the laptop. It is attached as follows:

To the A Cover (top lid): The screen is usually screwed onto the A Cover using 4‑8 small screws around the edges. Some models use adhesive tape or a metal frame instead of screws.
Behind the B Cover (bezel): The bezel covers the front of the screen – it must be removed first to access the screen.
The LCD cable connects from the back of the screen (or bottom edge) to the motherboard, passing through the hinge.
The screen also has a backlight cable (sometimes integrated with the main cable) that supplies power to the LED backlight.

Accessing the screen requires removing the bezel – some models also require removing the entire display assembly (lid) from the base to avoid damaging cables.

How do I connect the LCD cable to the screen and motherboard?

The connection involves two ends:

Screen end: The cable plugs into a connector on the back of the LCD panel (or at the bottom edge). This is typically a ZIF (Zero Insertion Force) connector. To connect:
- Flip up the small locking tab on the screen connector.
- Insert the cable with the gold contacts facing up (toward the tab) – the cable is often marked with a blue or red stripe to indicate pin 1.
- Press the tab down firmly to lock.
Motherboard end: The cable plugs into a header on the system board, usually labelled LCD, LVDS, eDP, or J_LCD. The procedure is the same – lift the ZIF tab, insert the cable correctly, and lock.

Critical: The cable must be inserted all the way – if it is not fully seated, you will get a partial display or no image. Do not force the cable; if it does not go in easily, check the orientation.

Always disconnect the battery before connecting or disconnecting the LCD cable to avoid short circuits.

How to replace the LCD screen step by step?

Note: This is a delicate operation – proceed with caution. If you are not confident, consider using a professional repair service.

Preparation: Power off the laptop, disconnect the AC adapter, and remove the battery (if removable). Work on a clean, soft surface.
Remove the bezel (B Cover):
- Use a plastic spudger or guitar pick to gently pry the bezel off – start from the inner edge (near the screen) and work your way around.
- Some bezels are secured with adhesive – apply low heat (hair dryer) to soften the glue.
- Be careful not to bend or crack the bezel – it is often thin and fragile.
Disconnect the old screen:
- Locate the LCD cable connector on the back of the screen (or at the bottom). Release the ZIF tab and gently pull the cable out.
- If there is a separate backlight cable, disconnect it as well.
- Remove the mounting screws (usually 4‑6) securing the screen to the A Cover.
- Lift the screen out carefully – avoid flexing it.
Install the new screen:
- Place the new screen in the same position – align the screw holes.
- Insert and tighten the mounting screws evenly – do not overtighten.
- Connect the LCD cable – insert it fully into the ZIF connector and lock the tab. Ensure the cable is not twisted or pinched.
- If your screen has a separate backlight cable, connect it as well.
Reattach the bezel:
- Press the bezel back into place – start from one corner and work around, ensuring all clips snap.
- If adhesive was used, apply new adhesive tape or use the original adhesive (if still sticky).
Test before full reassembly:
- Reconnect the battery and power on the laptop – check for proper display (no lines, flickering, or dead pixels).
- Test the brightness adjustment and if touchscreen, test touch functionality.
If everything works, power off, disconnect the battery, and reassemble any remaining covers.

Common pitfalls to avoid:

Forgetting to connect the cable before mounting the screen – you will need to redo the steps.
Pinching the LCD cable in the hinge area – route it carefully exactly as the original.
Using screws that are too long – they can damage the screen or the A Cover.
Not removing all old adhesive – this can cause the bezel to sit unevenly.

Watch our installation video or consult your laptop's service manual for model‑specific details.

What precautions should I take, and what if the screen does not work after installation?

Critical precautions:

Always disconnect the battery before handling any screen or cable – the LCD backlight can carry high voltage (up to 40V) and can damage the inverter or GPU.
Handle the screen by the edges – avoid touching the glass surface or the gold contacts on the cable.
Never bend or flex the screen – the glass can crack easily.
Use ESD protection – wear an anti‑static wrist strap or touch a grounded metal object before touching components.
Do not over‑tighten screws – screen frames are delicate; snug is enough.
Keep the screen clean – any dust or fingerprints on the inner surface will be visible when the backlight is on.

Troubleshooting – what if the screen does not work after installation?

No display (black screen):
- Check that the LCD cable is fully inserted and locked on both the screen and motherboard ends.
- Verify the laptop is powered on (listen for fan or look for caps lock light).
- Test with an external monitor to confirm the laptop is outputting video – if external works, the issue is with the screen or cable.
- Inspect the cable for damage – a pinched cable can break internal traces.
Backlight is on but no image (blank white/grey screen):
- This usually indicates the video data lines are not connected – reseat the cable, check for bent pins on the connector.
- Verify that the screen is compatible with your laptop's interface (e.g., eDP vs LVDS).
Flickering or intermittent display:
- Check cable routing – it may be pinched in the hinge area.
- Ensure the cable is not pulled taut – there should be a slight slack.
Lines, artifacts, or distorted colours:
- Reseat the cable – sometimes a poor connection causes signal noise.
- If lines persist, the screen may be defective – contact support.
Touch not working (for touch screens):
- Confirm the digitizer cable (if separate) is connected.
- Install the correct touch driver – some laptops need a specific driver for the new panel.
- Check BIOS settings – some laptops have a touch enable/disable option.
Brightness adjustment not working:
- Ensure the backlight cable (if separate) is connected.
- Check if the laptop’s brightness keys are functioning – if not, try reinstalling the graphics driver.
Screen is too dark or uneven backlight:
- This could be a backlight issue – ensure the connector is fully seated.
- If the screen is a different model, the brightness levels may be interpreted differently – adjust in the OS.

If you have tried all the above and the problem persists: Contact our support with photos of the screen issue and your laptop model – we will help diagnose and arrange a replacement if necessary.

New arrive

Acer Predator Triton 14 AI PT14-52T GPU Fan original

‌EUR € 32.40

Acer Predator Triton 14 AI PT14-52T CPU Fan original

‌EUR € 32.40

Lenovo Legion Pro 7 16ADR10H CPU fan original

‌EUR € 9.00

Lenovo Legion Pro 7 16ADR10H GPU fan original

‌EUR € 9.00