NE156FHM-NZ1 LCD screen panel

Q: What are the resolution and refresh rate of this screen?

Resolution: 1920(RGB)×1080, 16:9, FHD | Refresh Rate: 240HZ . Important considerations: Your laptop's graphics chip (GPU) must support this resolution and refresh rate. For example, 4K (3840x2160) requires a GPU with DisplayPort 1.2 or higher, and the LCD cable must have sufficient bandwidth (typically 40‑pin eDP). If your original screen was 1366x768 and you install a 1920x1080 panel, the system may work but the BIOS/EDID must recognise the new resolution – some older laptops are locked to the original resolution. High refresh rates (e.g., 144Hz) require a compatible cable and graphics output – ensure your laptop supports it. If you are upgrading to a higher resolution, we recommend checking your laptop's service manual or online forums for confirmed compatibility.

Q: What interface does this screen use, and what are the connector details?

Common interface types for reference: eDP 30 pin, Narrow: Width 0.67 inch (17mm), Pitch 0.4mm – common in ultra‑thin laptops. eDP 30 pin, Standard: Width 0.75 inch (19mm), Pitch 0.5mm – common in standard 14″–15.6″ models. eDP 40 pin, Narrow: Width 0.79 inch (20mm) or 0.83 inch (21mm), Pitch 0.4mm – used for 4K and high‑refresh panels. eDP 40 pin, Standard: Width 1.0 inch (25mm), Pitch 0.5mm – used in larger gaming laptops. LVDS 40 pin: Width 1.0 inch (25mm), Pitch 0.5mm – older interface, limited bandwidth. How to verify: Check the connector on your original screen – look for printed labels (e.g., "30P 0.4mm") or measure with a ruler. Compare with our product photos. If you are unsure, send us a clear photo of your original screen's connector – we can match it for you.

Q: What is the physical size of this screen?

Screen size: 15.6 (measured diagonally). Important: Even a 0.1‑inch difference can make the panel not fit in your bezel or the mounting holes may not align. Always measure your current screen's active area (visible portion) and outer dimensions (including the mounting tabs). Additionally, check the aspect ratio – most modern laptops use 16:9, but some use 16:10 (which is slightly taller). A 16:10 screen in a 16:9 bezel will not fit physically, and vice versa. How to measure: Remove the screen from the laptop and measure the diagonal of the active area (from corner to corner). Also measure the width and height of the entire panel (including the metal frame). Compare these numbers with our product specifications.

Q: Is this a touchscreen?

Touch support: No . This is a standard (non‑touch) panel. It will work in any laptop that accepts a non‑touch screen. If your laptop originally had a touchscreen, installing this non‑touch panel will result in lost touch functionality (but the display will still work). You may also need to use a non‑touch LCD cable.

Q: What is the grade/condition of this screen?

Grade: New Grade A+ . Understanding LCD grades: Grade A+ (New): Brand new, flawless panel, zero dead pixels, uniform brightness – the highest quality. Grade A (New compatible): New, but may have minor cosmetic variations (e.g., slightly different backlight uniformity) – rarely noticeable. Grade B (Used/Refurbished): May have a few ( We ship all screens in the grade stated on the product page. All screens are tested for functionality – no lines, no flickering, and backlight is working. If you require a specific grade, please check the product description or contact us before ordering.

Q: Does this screen have any dead pixels or defects?

All our LCD screens are strictly tested before shipping. They are guaranteed to be free of dead pixels, bright dots, and lines at the time of shipment. What to do if you find defects after installation: Check if the issue is caused by a loose cable – reseat the LCD cable on both ends. Test the screen on another compatible laptop (if possible) to isolate the issue. If the defects are clearly on the panel (e.g., a cluster of dead pixels or a visible scratch), contact our support within 7 days with photos – we will arrange a replacement or refund. Our warranty covers manufacturing defects only – physical damage during installation is not covered.

Q: Where is the screen physically located, and how is it attached?

The LCD screen is located inside the display lid (A Cover + B Cover) of the laptop. It is attached as follows: To the A Cover (top lid): The screen is usually screwed onto the A Cover using 4‑8 small screws around the edges. Some models use adhesive tape or a metal frame instead of screws. Behind the B Cover (bezel): The bezel covers the front of the screen – it must be removed first to access the screen. The LCD cable connects from the back of the screen (or bottom edge) to the motherboard, passing through the hinge. The screen also has a backlight cable (sometimes integrated with the main cable) that supplies power to the LED backlight. Accessing the screen requires removing the bezel – some models also require removing the entire display assembly (lid) from the base to avoid damaging cables.

Q: How do I connect the LCD cable to the screen and motherboard?

The connection involves two ends: Screen end: The cable plugs into a connector on the back of the LCD panel (or at the bottom edge). This is typically a ZIF (Zero Insertion Force) connector. To connect: Flip up the small locking tab on the screen connector. Insert the cable with the gold contacts facing up (toward the tab) – the cable is often marked with a blue or red stripe to indicate pin 1. Press the tab down firmly to lock. Motherboard end: The cable plugs into a header on the system board, usually labelled LCD , LVDS , eDP , or J_LCD . The procedure is the same – lift the ZIF tab, insert the cable correctly, and lock. Critical: The cable must be inserted all the way – if it is not fully seated, you will get a partial display or no image. Do not force the cable; if it does not go in easily, check the orientation. Always disconnect the battery before connecting or disconnecting the LCD cable to avoid short circuits.

ID: PCS-9458 Type: WLED display Size: 15.6 Model/PN: NE156FHM-NZ1 Refresh Rate: 240HZ Resolution: 1920(RGB)×1080, 16:9, FHD Interface: EDP 40 pin Connector width: 21mm Condition: New Grade A+

Availability: In Stock

‌EUR € 52.20

Qty

Bulk Quote

Shipping Estimate ship from China Click to detect

DDP - Delivered Duty Paid (Remote not included) / DDU - Delivered Duty Unpaid

Calculate Shipping

Guaranteed to fit your Display Panel NE156FHM-NZ1
Free step-by-step repair guide File
Tracked shipping & easy returns

Complete specifications for reference:
Asus TUF FA506QR Series Asus TUF FA506QR-AZ Asus TUF FA506QR-HN Asus TUF Gaming A15 FA506 Series Asus TUF FA506Q Asus TUF FA506QM Asus TUF FA506QR Asus FX506 Series Asus FX506H Asus FX506HM Asus TUF Dash F15 FX516 Series Asus TUF Dash F15 FX516P Asus TUF Dash F15 FX516PM Asus TUF Dash F15 FX516PR Asus TUF566 Series Asus TUF566H Asus TUF566HM Asus TUF566Q Asus TUF566QM Asus TUF566QR Asus TUF Gaming F15 TUF506 Series Asus TUF Gaming F15 TUF506H Asus TUF Gaming F15 TUF50HM Asus TUF Gaming F15 TUF506Q Asus TUF Gaming F15 TUF506QM Asus TUF Gaming F15 TUF506QR Asus FX566 Series Asus FX566H Asus FX566HM Asus ROG Strix G512 Series Asus ROG Strix G512L Asus ROG Strix G512LU Asus ROG Strix G512LV Asus ROG Strix G512LW Asus ROG Strix G512LWS Asus ROG Strix G513 Series Asus ROG Strix G513Q Asus ROG Strix G513QM Asus ROG Strix G513QR Asus ROG Strix G531 Series Asus ROG Strix G531G Asus ROG Strix G531GU Asus ROG Strix G531GV Asus ROG Strix G531GW Asus ROG Strix G532 Series Asus ROG Strix G532L Asus ROG Strix G532LV Asus ROG Strix G532LW Asus ROG Strix G532LWS Asus ROG Strix GL531 Series Asus ROG Strix GL531G Asus ROG Strix GL531GU Asus ROG Strix GL531GV Asus ROG Strix GL531GW Asus ROG Zephyrus G GA502 Series Asus ROG Zephyrus G GA502D Asus ROG Zephyrus G GA502DU Asus ROG Zephyrus G GA502I Asus ROG Zephyrus G GA502IU Asus ROG Zephyrus G GA502IV Asus ROG Zephyrus GA532 Series Asus ROG Zephyrus GA532D Asus ROG Zephyrus GA532DU Asus ROG Zephyrus GA532I Asus ROG Zephyrus GA532IU Asus ROG Zephyrus GA532IV Asus ROG Zephyrus M15 GU502 Series Asus ROG Zephyrus M15 GU502D Asus ROG Zephyrus M15 GU502DU Asus ROG Zephyrus M15 GU502G Asus ROG Zephyrus M15 GU502GU Asus ROG Zephyrus M15 GU502GV Asus ROG Zephyrus M15 GU502GW Asus ROG Zephyrus M15 GU502L Asus ROG Zephyrus M15 GU502LU Asus ROG Zephyrus M15 GU502LV Asus ROG Zephyrus M15 GU502LW Asus ROG Zephyrus M15 GU502LWS Asus ROG Zephyrus GU532 Series Asus ROG Zephyrus GU532G Asus ROG Zephyrus GU532GU Asus ROG Zephyrus GU532GV Asus ROG Zephyrus GU532L Asus ROG Zephyrus GU532LV Asus ROG Zephyrus GU532LW Asus ROG Zephyrus S GX502 Series Asus ROG Zephyrus S GX502G Asus ROG Zephyrus S GX502GV Asus ROG Zephyrus S GX502GW Asus ROG Zephyrus GX531 Series Asus ROG Zephyrus GX531G Asus ROG Zephyrus GX531GW Asus ROG Zephyrus GX531GWR Asus ROG Zephyrus GX531GX Asus ROG Zephyrus GX531GXR Asus Zephyrus GX532 Series Asus Zephyrus GX532G Asus Zephyrus GX532GV Asus Zephyrus GX532GW Asus Zephyrus GX535 Series Asus Zephyrus GX535G Asus Zephyrus GX535GX Asus Zephyrus GX535GXR Asus PX531 Series Asus PX531G Asus PX531GU Asus PX531GV Asus PX531GW Gigabyte Aero 15 Series Gigabyte Aero 15G XB Gigabyte Aero 15G XC Gigabyte Aero 15G XC-8DE2430SH Gigabyte Aero 15G XC-8UK2430SH Gigabyte Aero 15G XC-8US2430SH Gigabyte Aero 15G KB Gigabyte Aero 15G KB-7US2130MH Gigabyte Aero 15G KB-8UK2130MH Gigabyte Aero 15G KB-8US2130MH Gigabyte Aorus 15G Series Gigabyte Aorus 15G NB Gigabyte Aorus 15G WB Gigabyte Aorus 15G WB-8US2130MH Gigabyte Aorus 15G YB Gigabyte Aorus 15G YB-8US2130MP Gigabyte Aorus 15G YB-9US2430MP Gigabyte Aorus 15G YC Gigabyte Aorus 15G YC-8DE2450SH Gigabyte Aorus 15G YC-8UK2450SH Gigabyte Aorus 15G YC-8US2450SH Gigabyte AORUS 15G KC Gigabyte AORUS 15G KC-8ES2130SH Gigabyte AORUS 15G SB Gigabyte AORUS 15G SB-7ES1130MD Gigabyte AORUS 15G WB Gigabyte AORUS 15G WB-8ES2130MH Gigabyte AORUS 15G XC Gigabyte AORUS 15G XC-8ES2430SH Gigabyte AORUS 15G YB Gigabyte AORUS 15G YB-8ES2130MH Gigabyte AORUS 15G YB-9ES2430MP Gigabyte AORUS 15G YC Gigabyte AORUS 15G YC-8ES2450SH Gigabyte AORUS 15P KD Gigabyte AORUS 15P KD-72ES224SH Gigabyte AORUS 15P XD Gigabyte AORUS 15P XD-73ES224SO Gigabyte AORUS 15P YD Gigabyte AORUS 15P YD-74ES244SH Gigabyte A5 Series Gigabyte K1 Lenovo Legion 5-15IMH05H Series Lenovo Legion 5-15IMH05H (81Y6) Lenovo Legion 7-15IMH05 Series Lenovo Legion 7-15IMH05 (81YT) Lenovo Legion 7-15IMHg05 Lenovo Legion 7-15IMHg05 (81YU) MSI Delta 15 A5EFK Series 15 A5EFK-001 MSI Delta 15 A5EFK-002XTR MSI Delta 15 A5EFK-007TR MSI Delta 15 A5EFK-011XES MSI Delta 15 A5EFK-012TW MSI Delta 15 A5EFK-013NL MSI Delta 15 A5EFK-014BE MSI Delta 15 A5EFK-016BE MSI Delta 15 A5EFK-017NEU MSI Delta 15 A5EFK-023ZA MSI Delta 15 A5EFK-027NEU MSI Delta 15 A5EFK-028NEU MSI Delta 15 A5EFK-033FR MSI Delta 15 A5EFK-034FR MSI Delta 15 A5EFK-035FR MSI Delta 15 A5EFK-036XFR MSI Delta 15 A5EFK-037CN MSI Delta 15 A5EFK (MS-15CK) MSI Crosshair 15 B12UEZ MSI Crosshair 15 B12UGSZ (MS-1583) MSI Crosshair 15 C12VE MSI Crosshair 15 C12VF MSI Crosshair 15 C12VG (MS-1585) MSI Cyborg 15 A12VE (MS-15K1) MSI Stealth 15M B12UE (MS-15B1) MSI Sword 15 A12UE MSI Sword 15 A12UGS (MS-1583) MSI Katana 15 B13VEK MSI Katana 15 B13VFK (MS-1585) MSI GE65 Raider Series MSI GE65 9SE MSI GE65-9SE MSI GE65 9SF MSI GE65-9SF MSI Raider GE66 Series MSI Raider GE66 10SD MSI Raider GE66-10SD MSI Raider GE66 10SE MSI Raider GE66-10SE MSI Raider GE66 10SF MSI Raider GE66-10SF MSI Raider GE66 10SFS MSI Raider GE66-10SFS MSI Raider GE66 10UE MSI Raider GE66-10UE MSI Raider GE66 12UGS (MS-1544) MSI Katana GF66 Series MSI Katana GF66 12UC (MS-1584) MSI Katana GF66 12UE MSI Katana 12UEK MSI Katana 12UEOK MSI Katana 12UG MSI Katana 12UGS MSI Katana 12UGSK MSI Katana 12UGSOK MSI Katana 12UGSZOK (MS-1583) MSI Pulse GL66 Series MSI Pulse GL66 11UEK (MS-1581) MSI Pulse GL66 12UEK MSI Pulse 12UEOK MSI Pulse 12UGK MSI Pulse 12UGKV MSI Pulse 12UGSK MSI Pulse 12UGSOK MSI Pulse 12UGSZOK (MS-1583) MSI GS65 Series MSI GS65 9SD MSI GS65-9SD MSI GS65 9SE MSI GS65-9SE MSI GS65 9SF MSI GS65-9SF MSI GS65 9SG MSI GS65-9SG MSI Stealth GS66 Series MSI Stealth GS66 10SD MSI Stealth GS66-10SD MSI Stealth GS66 10SE MSI Stealth GS66-10SE MSI Stealth GS66 10SF MSI Stealth GS66-10SF MSI Stealth GS66 10SFS MSI Stealth GS66-10SFS MSI Stealth GS66 11UE MSI Stealth GS66-11UE MSI Stealth GS66 12UE MSI Stealth GS66 12UGS (MS-16V5) MSI GP66 Leopard Series MSI GP66 10UE MSI GP66 10UG MSI GP66 11UH MSI Vector GP66 Series MSI Vector GP66 12UE MSI Vector GP66 12UEO MSI Vector GP66 12UG MSI Vector GP66 12UGS MSI Vector GP66 12UGSO MSI Vector GP66 12UH (MS-1544) MSI WF66 Series MSI WF66 11UI MSI WF66 11UJ (MS-1582)

Description

Product Description

NE156FHM-NZ1 LCD screen panel – a high‑quality LCD panel designed for laptops, delivering crisp visuals and accurate color reproduction.

Key specifications:

Screen Size: 15.6 – measured diagonally; verify it matches your bezel cutout.
Resolution: 1920(RGB)×1080, 16:9, FHD – ensure your GPU supports this resolution (e.g., 4K requires eDP 40‑pin).
Refresh Rate: 240HZ – higher refresh rates (≥120Hz) require compatible cable and GPU.
Interface: EDP 40 pin, Narrow, Width: 0.83 inch (21mm), Pitch 0.4mm – connector type and pin count (e.g., eDP 30‑pin 0.5mm).
Touchscreen: No – if Yes, your motherboard and cable must support touch digitizer.
Condition: New Grade A+ – condition of the panel.
Model/PN: NE156FHM-NZ1 – compare with the part number on your original screen.

Compatibility: Guaranteed fit for . Double‑check the connector width and pitch before installation.

Installation tip: Handle the screen by the edges, avoid touching the glass, and route the cable carefully through the hinge to prevent pinching.

Warranty & Support: All products come with a 7‑day return policy and free technical support. If you have any compatibility questions, contact our team at info@pcspare.com.

SKU: LT-9458 | Last updated: 2026-10-21 07:25:50

Internal Structure Diagram Search and view the internal structure of this part

LCD Panel — Layer Structure

Frequently Asked Questions & Solutions

What are the resolution and refresh rate of this screen?

Resolution: 1920(RGB)×1080, 16:9, FHD | Refresh Rate: 240HZ.

Important considerations:

Your laptop's graphics chip (GPU) must support this resolution and refresh rate. For example, 4K (3840x2160) requires a GPU with DisplayPort 1.2 or higher, and the LCD cable must have sufficient bandwidth (typically 40‑pin eDP).
If your original screen was 1366x768 and you install a 1920x1080 panel, the system may work but the BIOS/EDID must recognise the new resolution – some older laptops are locked to the original resolution.
High refresh rates (e.g., 144Hz) require a compatible cable and graphics output – ensure your laptop supports it.

If you are upgrading to a higher resolution, we recommend checking your laptop's service manual or online forums for confirmed compatibility.

What interface does this screen use, and what are the connector details?

Common interface types for reference:

eDP 30 pin, Narrow: Width 0.67 inch (17mm), Pitch 0.4mm – common in ultra‑thin laptops.
eDP 30 pin, Standard: Width 0.75 inch (19mm), Pitch 0.5mm – common in standard 14″–15.6″ models.
eDP 40 pin, Narrow: Width 0.79 inch (20mm) or 0.83 inch (21mm), Pitch 0.4mm – used for 4K and high‑refresh panels.
eDP 40 pin, Standard: Width 1.0 inch (25mm), Pitch 0.5mm – used in larger gaming laptops.
LVDS 40 pin: Width 1.0 inch (25mm), Pitch 0.5mm – older interface, limited bandwidth.

How to verify: Check the connector on your original screen – look for printed labels (e.g., "30P 0.4mm") or measure with a ruler. Compare with our product photos.

If you are unsure, send us a clear photo of your original screen's connector – we can match it for you.

What is the physical size of this screen?

Screen size: 15.6 (measured diagonally).

Important: Even a 0.1‑inch difference can make the panel not fit in your bezel or the mounting holes may not align. Always measure your current screen's active area (visible portion) and outer dimensions (including the mounting tabs).

Additionally, check the aspect ratio – most modern laptops use 16:9, but some use 16:10 (which is slightly taller). A 16:10 screen in a 16:9 bezel will not fit physically, and vice versa.

How to measure: Remove the screen from the laptop and measure the diagonal of the active area (from corner to corner). Also measure the width and height of the entire panel (including the metal frame). Compare these numbers with our product specifications.

Is this a touchscreen?

Touch support: No. This is a standard (non‑touch) panel.

It will work in any laptop that accepts a non‑touch screen. If your laptop originally had a touchscreen, installing this non‑touch panel will result in lost touch functionality (but the display will still work). You may also need to use a non‑touch LCD cable.

What is the grade/condition of this screen?

Grade: New Grade A+.

Understanding LCD grades:

Grade A+ (New): Brand new, flawless panel, zero dead pixels, uniform brightness – the highest quality.
Grade A (New compatible): New, but may have minor cosmetic variations (e.g., slightly different backlight uniformity) – rarely noticeable.
Grade B (Used/Refurbished): May have a few (<5) dead pixels or minor scratches that do not affect performance – suitable for budget repairs.

We ship all screens in the grade stated on the product page. All screens are tested for functionality – no lines, no flickering, and backlight is working.

If you require a specific grade, please check the product description or contact us before ordering.

Does this screen have any dead pixels or defects?

All our LCD screens are strictly tested before shipping. They are guaranteed to be free of dead pixels, bright dots, and lines at the time of shipment.

What to do if you find defects after installation:

Check if the issue is caused by a loose cable – reseat the LCD cable on both ends.
Test the screen on another compatible laptop (if possible) to isolate the issue.
If the defects are clearly on the panel (e.g., a cluster of dead pixels or a visible scratch), contact our support within 7 days with photos – we will arrange a replacement or refund.

Our warranty covers manufacturing defects only – physical damage during installation is not covered.

Where is the screen physically located, and how is it attached?

The LCD screen is located inside the display lid (A Cover + B Cover) of the laptop. It is attached as follows:

To the A Cover (top lid): The screen is usually screwed onto the A Cover using 4‑8 small screws around the edges. Some models use adhesive tape or a metal frame instead of screws.
Behind the B Cover (bezel): The bezel covers the front of the screen – it must be removed first to access the screen.
The LCD cable connects from the back of the screen (or bottom edge) to the motherboard, passing through the hinge.
The screen also has a backlight cable (sometimes integrated with the main cable) that supplies power to the LED backlight.

Accessing the screen requires removing the bezel – some models also require removing the entire display assembly (lid) from the base to avoid damaging cables.

How do I connect the LCD cable to the screen and motherboard?

The connection involves two ends:

Screen end: The cable plugs into a connector on the back of the LCD panel (or at the bottom edge). This is typically a ZIF (Zero Insertion Force) connector. To connect:
- Flip up the small locking tab on the screen connector.
- Insert the cable with the gold contacts facing up (toward the tab) – the cable is often marked with a blue or red stripe to indicate pin 1.
- Press the tab down firmly to lock.
Motherboard end: The cable plugs into a header on the system board, usually labelled LCD, LVDS, eDP, or J_LCD. The procedure is the same – lift the ZIF tab, insert the cable correctly, and lock.

Critical: The cable must be inserted all the way – if it is not fully seated, you will get a partial display or no image. Do not force the cable; if it does not go in easily, check the orientation.

Always disconnect the battery before connecting or disconnecting the LCD cable to avoid short circuits.

How to replace the LCD screen step by step?

Note: This is a delicate operation – proceed with caution. If you are not confident, consider using a professional repair service.

Preparation: Power off the laptop, disconnect the AC adapter, and remove the battery (if removable). Work on a clean, soft surface.
Remove the bezel (B Cover):
- Use a plastic spudger or guitar pick to gently pry the bezel off – start from the inner edge (near the screen) and work your way around.
- Some bezels are secured with adhesive – apply low heat (hair dryer) to soften the glue.
- Be careful not to bend or crack the bezel – it is often thin and fragile.
Disconnect the old screen:
- Locate the LCD cable connector on the back of the screen (or at the bottom). Release the ZIF tab and gently pull the cable out.
- If there is a separate backlight cable, disconnect it as well.
- Remove the mounting screws (usually 4‑6) securing the screen to the A Cover.
- Lift the screen out carefully – avoid flexing it.
Install the new screen:
- Place the new screen in the same position – align the screw holes.
- Insert and tighten the mounting screws evenly – do not overtighten.
- Connect the LCD cable – insert it fully into the ZIF connector and lock the tab. Ensure the cable is not twisted or pinched.
- If your screen has a separate backlight cable, connect it as well.
Reattach the bezel:
- Press the bezel back into place – start from one corner and work around, ensuring all clips snap.
- If adhesive was used, apply new adhesive tape or use the original adhesive (if still sticky).
Test before full reassembly:
- Reconnect the battery and power on the laptop – check for proper display (no lines, flickering, or dead pixels).
- Test the brightness adjustment and if touchscreen, test touch functionality.
If everything works, power off, disconnect the battery, and reassemble any remaining covers.

Common pitfalls to avoid:

Forgetting to connect the cable before mounting the screen – you will need to redo the steps.
Pinching the LCD cable in the hinge area – route it carefully exactly as the original.
Using screws that are too long – they can damage the screen or the A Cover.
Not removing all old adhesive – this can cause the bezel to sit unevenly.

Watch our installation video or consult your laptop's service manual for model‑specific details.

What precautions should I take, and what if the screen does not work after installation?

Critical precautions:

Always disconnect the battery before handling any screen or cable – the LCD backlight can carry high voltage (up to 40V) and can damage the inverter or GPU.
Handle the screen by the edges – avoid touching the glass surface or the gold contacts on the cable.
Never bend or flex the screen – the glass can crack easily.
Use ESD protection – wear an anti‑static wrist strap or touch a grounded metal object before touching components.
Do not over‑tighten screws – screen frames are delicate; snug is enough.
Keep the screen clean – any dust or fingerprints on the inner surface will be visible when the backlight is on.

Troubleshooting – what if the screen does not work after installation?

No display (black screen):
- Check that the LCD cable is fully inserted and locked on both the screen and motherboard ends.
- Verify the laptop is powered on (listen for fan or look for caps lock light).
- Test with an external monitor to confirm the laptop is outputting video – if external works, the issue is with the screen or cable.
- Inspect the cable for damage – a pinched cable can break internal traces.
Backlight is on but no image (blank white/grey screen):
- This usually indicates the video data lines are not connected – reseat the cable, check for bent pins on the connector.
- Verify that the screen is compatible with your laptop's interface (e.g., eDP vs LVDS).
Flickering or intermittent display:
- Check cable routing – it may be pinched in the hinge area.
- Ensure the cable is not pulled taut – there should be a slight slack.
Lines, artifacts, or distorted colours:
- Reseat the cable – sometimes a poor connection causes signal noise.
- If lines persist, the screen may be defective – contact support.
Touch not working (for touch screens):
- Confirm the digitizer cable (if separate) is connected.
- Install the correct touch driver – some laptops need a specific driver for the new panel.
- Check BIOS settings – some laptops have a touch enable/disable option.
Brightness adjustment not working:
- Ensure the backlight cable (if separate) is connected.
- Check if the laptop’s brightness keys are functioning – if not, try reinstalling the graphics driver.
Screen is too dark or uneven backlight:
- This could be a backlight issue – ensure the connector is fully seated.
- If the screen is a different model, the brightness levels may be interpreted differently – adjust in the OS.

If you have tried all the above and the problem persists: Contact our support with photos of the screen issue and your laptop model – we will help diagnose and arrange a replacement if necessary.

New arrive

‌EUR € 0.00

MSI WE76 CPU Fan original PABD1A010SHR-N451

‌EUR € 11.70

Lenovo ThinkBook 14 G8 IRL CPU fan original

‌EUR € 6.30

Lenovo K14 G3 IMU CPU fan original

‌EUR € 6.30