LP156WF4-SPB1 LCD screen panel

Q: What are the resolution and refresh rate of this screen?

Resolution: 1920(RGB)×1080, 16:9, FHD | Refresh Rate: 60HZ . Important considerations: Your laptop's graphics chip (GPU) must support this resolution and refresh rate. For example, 4K (3840x2160) requires a GPU with DisplayPort 1.2 or higher, and the LCD cable must have sufficient bandwidth (typically 40‑pin eDP). If your original screen was 1366x768 and you install a 1920x1080 panel, the system may work but the BIOS/EDID must recognise the new resolution – some older laptops are locked to the original resolution. High refresh rates (e.g., 144Hz) require a compatible cable and graphics output – ensure your laptop supports it. If you are upgrading to a higher resolution, we recommend checking your laptop's service manual or online forums for confirmed compatibility.

Q: What interface does this screen use, and what are the connector details?

Common interface types for reference: eDP 30 pin, Narrow: Width 0.67 inch (17mm), Pitch 0.4mm – common in ultra‑thin laptops. eDP 30 pin, Standard: Width 0.75 inch (19mm), Pitch 0.5mm – common in standard 14″–15.6″ models. eDP 40 pin, Narrow: Width 0.79 inch (20mm) or 0.83 inch (21mm), Pitch 0.4mm – used for 4K and high‑refresh panels. eDP 40 pin, Standard: Width 1.0 inch (25mm), Pitch 0.5mm – used in larger gaming laptops. LVDS 40 pin: Width 1.0 inch (25mm), Pitch 0.5mm – older interface, limited bandwidth. How to verify: Check the connector on your original screen – look for printed labels (e.g., "30P 0.4mm") or measure with a ruler. Compare with our product photos. If you are unsure, send us a clear photo of your original screen's connector – we can match it for you.

Q: What is the physical size of this screen?

Screen size: 15.6 (measured diagonally). Important: Even a 0.1‑inch difference can make the panel not fit in your bezel or the mounting holes may not align. Always measure your current screen's active area (visible portion) and outer dimensions (including the mounting tabs). Additionally, check the aspect ratio – most modern laptops use 16:9, but some use 16:10 (which is slightly taller). A 16:10 screen in a 16:9 bezel will not fit physically, and vice versa. How to measure: Remove the screen from the laptop and measure the diagonal of the active area (from corner to corner). Also measure the width and height of the entire panel (including the metal frame). Compare these numbers with our product specifications.

Q: Is this a touchscreen?

Touch support: No . This is a standard (non‑touch) panel. It will work in any laptop that accepts a non‑touch screen. If your laptop originally had a touchscreen, installing this non‑touch panel will result in lost touch functionality (but the display will still work). You may also need to use a non‑touch LCD cable.

Q: What is the grade/condition of this screen?

Grade: Used, Like New Grade A+ . Understanding LCD grades: Grade A+ (New): Brand new, flawless panel, zero dead pixels, uniform brightness – the highest quality. Grade A (New compatible): New, but may have minor cosmetic variations (e.g., slightly different backlight uniformity) – rarely noticeable. Grade B (Used/Refurbished): May have a few ( We ship all screens in the grade stated on the product page. All screens are tested for functionality – no lines, no flickering, and backlight is working. If you require a specific grade, please check the product description or contact us before ordering.

Q: Does this screen have any dead pixels or defects?

All our LCD screens are strictly tested before shipping. They are guaranteed to be free of dead pixels, bright dots, and lines at the time of shipment. What to do if you find defects after installation: Check if the issue is caused by a loose cable – reseat the LCD cable on both ends. Test the screen on another compatible laptop (if possible) to isolate the issue. If the defects are clearly on the panel (e.g., a cluster of dead pixels or a visible scratch), contact our support within 7 days with photos – we will arrange a replacement or refund. Our warranty covers manufacturing defects only – physical damage during installation is not covered.

Q: Where is the screen physically located, and how is it attached?

The LCD screen is located inside the display lid (A Cover + B Cover) of the laptop. It is attached as follows: To the A Cover (top lid): The screen is usually screwed onto the A Cover using 4‑8 small screws around the edges. Some models use adhesive tape or a metal frame instead of screws. Behind the B Cover (bezel): The bezel covers the front of the screen – it must be removed first to access the screen. The LCD cable connects from the back of the screen (or bottom edge) to the motherboard, passing through the hinge. The screen also has a backlight cable (sometimes integrated with the main cable) that supplies power to the LED backlight. Accessing the screen requires removing the bezel – some models also require removing the entire display assembly (lid) from the base to avoid damaging cables.

Q: How do I connect the LCD cable to the screen and motherboard?

The connection involves two ends: Screen end: The cable plugs into a connector on the back of the LCD panel (or at the bottom edge). This is typically a ZIF (Zero Insertion Force) connector. To connect: Flip up the small locking tab on the screen connector. Insert the cable with the gold contacts facing up (toward the tab) – the cable is often marked with a blue or red stripe to indicate pin 1. Press the tab down firmly to lock. Motherboard end: The cable plugs into a header on the system board, usually labelled LCD , LVDS , eDP , or J_LCD . The procedure is the same – lift the ZIF tab, insert the cable correctly, and lock. Critical: The cable must be inserted all the way – if it is not fully seated, you will get a partial display or no image. Do not force the cable; if it does not go in easily, check the orientation. Always disconnect the battery before connecting or disconnecting the LCD cable to avoid short circuits.

ID: PCS-6734 Type: WLED display Size: 15.6 Model/PN: LP156WF4-SPB1 Refresh Rate: 60HZ Resolution: 1920(RGB)×1080, 16:9, FHD Interface: EDP 30 pin Connector width: 19mm Pin pitch: 0.5mm Condition: Used, Like New Grade A+

Availability: In Stock

‌EUR € 27.00

Qty

Bulk Quote

Shipping Estimate ship from China Click to detect

DDP - Delivered Duty Paid (Remote not included) / DDU - Delivered Duty Unpaid

Calculate Shipping

Guaranteed to fit your Display Panel LP156WF4-SPB1
Free step-by-step repair guide File
Tracked shipping & easy returns

Complete specifications for reference:
Acer Acer Nitro 5 AN515-52 Series (incluye modelos: AN515-52-50WX AN515-52-50YX AN515-52-51SH AN515-52-53G3 AN515-52-59FA AN515-52-70GN AN515-52-71XG AN515-52-7244 AN515-52-72MN AN515-52-73U4 AN515-52-74DR AN515-52-74G4 AN515-52-74RD AN515-52-75W6 AN515-52-79VC) Acer Aspire Z5WAH Acer Nitro 5 AN515-57 Asus Asus ROG GL553V / GL553VD / GL553VW Series Asus ROG GL552V / GL552V Series Asus VivoBook A505BP-EJ141T Asus R510J Asus F555L Asus X556UA Dell Dell Inspiron 5570 Dell Inspiron 15 3000 Series Dell Inspiron 15-3000 Series Dell Inspiron 3580 Dell Inspiron 15 3580 Dell Inspiron 15-3580 (P75F) Dell Inspiron 15-3580 (P75F006) Dell Inspiron 15 5000 Series Dell Inspiron 15-5000 Series Dell Inspiron 5570 Dell Inspiron 15 5570 Dell Inspiron 15-5570 (P75F) Dell Inspiron 15-5570 (P75F001) Dell Inspiron 5558 Dell Inspiron 15 5558 Dell Inspiron 15-5558 (P51F) Dell Inspiron 15-5558 (P51F001) Dell Inspiron 5559 Dell Inspiron 15 5559 Dell Inspiron15-5559 (P51F) Dell Inspiron15-5559 (P51F004) Dell Latitude 15 E6000 Series Dell Latitude 15-E6000 Series Dell Latitude E6540 Dell Latitude 15 E6540 Dell Latitude 15-E6540 Dell Latitude 15 3000 Series Dell Latitude 15-3000 Series Dell Latitude 3580 Dell Latitude 15 3580 Dell Latitude 15-3580 (P79G) Dell Latitude 15-3580 (P79G001) Dell Vostro 15 3000 Series Dell Vostro 15-3000 Series Dell Vostro 3558 15 3558 Dell Vostro 15-3558 (P52F) Dell Vostro 15-3558 (P52F001) Dell Vostro 3559 15 3559 Dell Vostro 15-3559 (P52F) Dell Vostro 15-3559 (P52F003) Dell Vostro 3568 15 3568 Dell Vostro 15-3568 (P63F) Dell Vostro 15-3568 (P63F001) Dell Vostro 3578 15 3578 Dell Vostro 15-3578 (P63F) Dell Vostro 15-3578 (P63F002) Dell Vostro 3580 15 3580 Dell Vostro 15-3580 (P75F) Dell Vostro 15-3580 (P75F010) Dell Vostro 3581 15 3581 Dell Vostro 15-3581 (P75F) Dell Vostro 15-3581 (P75F009) Dell Vostro 15 5000 Series Dell Vostro 15-5000 Series Dell Vostro 5568 15 5568 Dell Vostro 15-5568 (P62F) Dell Vostro 15-5568 (P62F001) Fujitsu Fujitsu LifeBook E458 Fujitsu LifeBook E459 Fujitsu LifeBook E554 Fujitsu LifeBook E556 Fujitsu LifeBook E557 Fujitsu LifeBook E558 Fujitsu LifeBook E559 Fujitsu LifeBook E754 Fujitsu LifeBook E756 Fujitsu LifeBook E4511 Fujitsu LifeBook E5510 Fujitsu LifeBook E5511 Fujitsu LifeBook U757 Fujitsu LifeBook U758 Fujitsu LifeBook U759 Fujitsu LifeBook U7510 Fujitsu LifeBook U7511 Fujitsu LifeBook U7512 HP HP ProBook 650 G4 / G5 HP Pavilion 3168NGW HP Omen 15 Series (incluye modelos: AX001NS AX033DX AX001NB AX014TX AX200NK AX200NL AX200NO AX200NT AX200NU AX200NX AX200UR AX201LA AX201NC AX201NH AX201NQ AX201NV AX202NC AX202NG AX203NG AX203UR AX204TX AX205NP AX207UR AX208NF AX210NO AX210NS AX210TX AX212NF AX212NL AX212NO AX216NF AX217NL AX217TX AX220NF AX221NL AX223TX AX225NF AX226TX AX227NF AX228TX AX229NF AX230NF AX233NF AX237NF AX237TX AX242NF AX247TX AX249TX AX252NR AX257NR AX289NZ) HP Omen 15-CE000 Series (incluye modelos: CE000NB CE000ND CE000NF CE000NG CE000NO CE000NP CE000NQ CE000NU CE000UR CE001LA CE001NA CE001NE CE001NF CE001NG CE001NI CE001NIA CE001NJ CE001NK CE001NL CE001NP CE001NQ CE001NU CE001NW CE001NX CE001TX CE002LA CE002NB CE002NE CE002NF CE002NG CE002NI CE002NIA CE002NK CE002NL CE002NM CE002NO CE002NP CE002NQ CE002NS CE002NT CE002NW CE002TX CE003LA CE003NA CE003NE CE003NF CE003NI CE003NJ CE003NK CE003NL CE003NM CE003NO CE003NP CE003NQ CE003NS CE003NT CE003TX CE004LA CE004NA CE004NB CE004NE CE004NF CE004NG CE004NI CE004NK CE004NL CE004NQ CE004NS CE004NT CE004NW CE004TX CE004UR CE005LA CE005NC CE005NE CE005NG CE005NH CE005NK CE005NL CE005NM CE005NO CE005NP CE005NQ CE005NS CE005NT CE005NV CE005NW CE005TX CE005UR CE006NA CE006NC CE006NE CE006NI CE006NK CE006NL CE006NM CE006NO CE006NQ CE006NS) Lenovo Lenovo V130-15IKB Lenovo V330-15IKB Lenovo IdeaPad 330-15ICH Lenovo Legion Y520 Series (incluye modelos: Y520-15IKBM Y520-15IKBN Ideapad Y520-15IKBN) Lenovo ThinkPad T580 Series (incluye modelos: 20L90025GE 20L90021GE 20L90026GE 20L90024GE 20L90020GE 20L9001YGE 20L90000AD 20L90000ED 20L90000EQ 20L90000FE 20L90000PE 20L90000UE 20L90000ZA 20L90001AD 20L90001ED 20L90001EQ 20L90001FE 20L90001PE 20L90001UE 20L90001ZA 20L90002AD 20L90002ED 20L90002EQ 20L90002FE 20L90002PE 20L90002UE 20L90002ZA 20L90003AD 20L90003ED 20L90003EQ 20L90003FE 20L90003PE 20L90003UE 20L90003ZA 20L90004AD 20L90004ED 20L90004EQ 20L90004FE 20L90004PE 20L90004UE 20L90004ZA 20L90005AD 20L90005ED 20L90005EQ 20L90005FE 20L90005PE 20L90005UE 20L90005ZA 20L90006TW 20L90007TW 20L90008TA 20L90009TH 20L9000AVA 20L9000TAU 20L9000UAD 20L9000UAU 20L9000UED 20L9000UEQ 20L9000UFE 20L9000UPE 20L9000UUE 20L9000UZA 20L9000VAU 20L9000WAU 20L9000XAU 20L9000YAU 20L90010AU 20L90011AU 20L90012AD 20L90012AU 20L90012ED 20L90012EQ 20L90012FE 20L90012PE 20L90012UE 20L90012ZA 20L90013AU 20L90014AU 20L90015AU 20L90016AU 20L90017AU 20L90018CA 20L90018CC 20L90018US 20L90019CA 20L90019CC 20L90019US 20L9001ACA 20L9001ACC 20L9001AUS 20L9001BCA 20L9001BCC 20L9001BUS 20L9001CCA 20L9001CCC 20L9001DCA 20L9001DCC 20L9001DUS 20L9001ECA 20L9001ECC 20L9001EUS 20L9001FCA 20L9001FCC 20L9001FUS) MSI MSI GL62M 7RDX Series MSI GE60 2QE Apache Pro / GE60 2PC Apache MSI GP62 2QE Leopard Pro MSI MS-16J3 MSI MS-16GF MSI GV62 Toshiba Toshiba Satellite P50-A-14G Toshiba Satellite L50-C Series Toshiba Satellite L50D-C Series Toshiba Satellite P50A Toshiba Satellite P50 Medion Medion Akoya P6658 Medion Akoya P6659 Medion Erazer MD99873 Medion Erazer P6661 Medion Erazer P6681 Medion Erazer P6689 Sony Sony Vaio VPC-SE Series Sony Vaio VPC-SE1S1C Sony Vaio VPC-SE2S2C Sony Vaio PCG-41413M Dell 5580 HP 15DW Fujitsu LifeBook E558 PRIMUX IOXBOOK 15CA - REF.LCD - LM156X007A40 Thomson SPN15I3-8TU512 / SPN1513-8TU512

Description

Product Description

LP156WF4-SPB1 LCD screen panel – a high‑quality LCD panel designed for laptops, delivering crisp visuals and accurate color reproduction.

Key specifications:

Screen Size: 15.6 – measured diagonally; verify it matches your bezel cutout.
Resolution: 1920(RGB)×1080, 16:9, FHD – ensure your GPU supports this resolution (e.g., 4K requires eDP 40‑pin).
Refresh Rate: 60HZ – higher refresh rates (≥120Hz) require compatible cable and GPU.
Interface: EDP 30 pin, Width: 0.75 inch (19mm), Pitch: 0.5mm – connector type and pin count (e.g., eDP 30‑pin 0.5mm).
Touchscreen: No – if Yes, your motherboard and cable must support touch digitizer.
Condition: Used, Like New Grade A+ – condition of the panel.
Model/PN: LP156WF4-SPB1 – compare with the part number on your original screen.

Compatibility: Guaranteed fit for . Double‑check the connector width and pitch before installation.

Installation tip: Handle the screen by the edges, avoid touching the glass, and route the cable carefully through the hinge to prevent pinching.

Warranty & Support: All products come with a 7‑day return policy and free technical support. If you have any compatibility questions, contact our team at info@pcspare.com.

SKU: LT-6734 | Last updated: 2026-10-21 07:25:44

Internal Structure Diagram Search and view the internal structure of this part

LCD Panel — Layer Structure

Frequently Asked Questions & Solutions

What are the resolution and refresh rate of this screen?

Resolution: 1920(RGB)×1080, 16:9, FHD | Refresh Rate: 60HZ.

Important considerations:

Your laptop's graphics chip (GPU) must support this resolution and refresh rate. For example, 4K (3840x2160) requires a GPU with DisplayPort 1.2 or higher, and the LCD cable must have sufficient bandwidth (typically 40‑pin eDP).
If your original screen was 1366x768 and you install a 1920x1080 panel, the system may work but the BIOS/EDID must recognise the new resolution – some older laptops are locked to the original resolution.
High refresh rates (e.g., 144Hz) require a compatible cable and graphics output – ensure your laptop supports it.

If you are upgrading to a higher resolution, we recommend checking your laptop's service manual or online forums for confirmed compatibility.

What interface does this screen use, and what are the connector details?

Common interface types for reference:

eDP 30 pin, Narrow: Width 0.67 inch (17mm), Pitch 0.4mm – common in ultra‑thin laptops.
eDP 30 pin, Standard: Width 0.75 inch (19mm), Pitch 0.5mm – common in standard 14″–15.6″ models.
eDP 40 pin, Narrow: Width 0.79 inch (20mm) or 0.83 inch (21mm), Pitch 0.4mm – used for 4K and high‑refresh panels.
eDP 40 pin, Standard: Width 1.0 inch (25mm), Pitch 0.5mm – used in larger gaming laptops.
LVDS 40 pin: Width 1.0 inch (25mm), Pitch 0.5mm – older interface, limited bandwidth.

How to verify: Check the connector on your original screen – look for printed labels (e.g., "30P 0.4mm") or measure with a ruler. Compare with our product photos.

If you are unsure, send us a clear photo of your original screen's connector – we can match it for you.

What is the physical size of this screen?

Screen size: 15.6 (measured diagonally).

Important: Even a 0.1‑inch difference can make the panel not fit in your bezel or the mounting holes may not align. Always measure your current screen's active area (visible portion) and outer dimensions (including the mounting tabs).

Additionally, check the aspect ratio – most modern laptops use 16:9, but some use 16:10 (which is slightly taller). A 16:10 screen in a 16:9 bezel will not fit physically, and vice versa.

How to measure: Remove the screen from the laptop and measure the diagonal of the active area (from corner to corner). Also measure the width and height of the entire panel (including the metal frame). Compare these numbers with our product specifications.

Is this a touchscreen?

Touch support: No. This is a standard (non‑touch) panel.

It will work in any laptop that accepts a non‑touch screen. If your laptop originally had a touchscreen, installing this non‑touch panel will result in lost touch functionality (but the display will still work). You may also need to use a non‑touch LCD cable.

What is the grade/condition of this screen?

Grade: Used, Like New Grade A+.

Understanding LCD grades:

Grade A+ (New): Brand new, flawless panel, zero dead pixels, uniform brightness – the highest quality.
Grade A (New compatible): New, but may have minor cosmetic variations (e.g., slightly different backlight uniformity) – rarely noticeable.
Grade B (Used/Refurbished): May have a few (<5) dead pixels or minor scratches that do not affect performance – suitable for budget repairs.

We ship all screens in the grade stated on the product page. All screens are tested for functionality – no lines, no flickering, and backlight is working.

If you require a specific grade, please check the product description or contact us before ordering.

Does this screen have any dead pixels or defects?

All our LCD screens are strictly tested before shipping. They are guaranteed to be free of dead pixels, bright dots, and lines at the time of shipment.

What to do if you find defects after installation:

Check if the issue is caused by a loose cable – reseat the LCD cable on both ends.
Test the screen on another compatible laptop (if possible) to isolate the issue.
If the defects are clearly on the panel (e.g., a cluster of dead pixels or a visible scratch), contact our support within 7 days with photos – we will arrange a replacement or refund.

Our warranty covers manufacturing defects only – physical damage during installation is not covered.

Where is the screen physically located, and how is it attached?

The LCD screen is located inside the display lid (A Cover + B Cover) of the laptop. It is attached as follows:

To the A Cover (top lid): The screen is usually screwed onto the A Cover using 4‑8 small screws around the edges. Some models use adhesive tape or a metal frame instead of screws.
Behind the B Cover (bezel): The bezel covers the front of the screen – it must be removed first to access the screen.
The LCD cable connects from the back of the screen (or bottom edge) to the motherboard, passing through the hinge.
The screen also has a backlight cable (sometimes integrated with the main cable) that supplies power to the LED backlight.

Accessing the screen requires removing the bezel – some models also require removing the entire display assembly (lid) from the base to avoid damaging cables.

How do I connect the LCD cable to the screen and motherboard?

The connection involves two ends:

Screen end: The cable plugs into a connector on the back of the LCD panel (or at the bottom edge). This is typically a ZIF (Zero Insertion Force) connector. To connect:
- Flip up the small locking tab on the screen connector.
- Insert the cable with the gold contacts facing up (toward the tab) – the cable is often marked with a blue or red stripe to indicate pin 1.
- Press the tab down firmly to lock.
Motherboard end: The cable plugs into a header on the system board, usually labelled LCD, LVDS, eDP, or J_LCD. The procedure is the same – lift the ZIF tab, insert the cable correctly, and lock.

Critical: The cable must be inserted all the way – if it is not fully seated, you will get a partial display or no image. Do not force the cable; if it does not go in easily, check the orientation.

Always disconnect the battery before connecting or disconnecting the LCD cable to avoid short circuits.

How to replace the LCD screen step by step?

Note: This is a delicate operation – proceed with caution. If you are not confident, consider using a professional repair service.

Preparation: Power off the laptop, disconnect the AC adapter, and remove the battery (if removable). Work on a clean, soft surface.
Remove the bezel (B Cover):
- Use a plastic spudger or guitar pick to gently pry the bezel off – start from the inner edge (near the screen) and work your way around.
- Some bezels are secured with adhesive – apply low heat (hair dryer) to soften the glue.
- Be careful not to bend or crack the bezel – it is often thin and fragile.
Disconnect the old screen:
- Locate the LCD cable connector on the back of the screen (or at the bottom). Release the ZIF tab and gently pull the cable out.
- If there is a separate backlight cable, disconnect it as well.
- Remove the mounting screws (usually 4‑6) securing the screen to the A Cover.
- Lift the screen out carefully – avoid flexing it.
Install the new screen:
- Place the new screen in the same position – align the screw holes.
- Insert and tighten the mounting screws evenly – do not overtighten.
- Connect the LCD cable – insert it fully into the ZIF connector and lock the tab. Ensure the cable is not twisted or pinched.
- If your screen has a separate backlight cable, connect it as well.
Reattach the bezel:
- Press the bezel back into place – start from one corner and work around, ensuring all clips snap.
- If adhesive was used, apply new adhesive tape or use the original adhesive (if still sticky).
Test before full reassembly:
- Reconnect the battery and power on the laptop – check for proper display (no lines, flickering, or dead pixels).
- Test the brightness adjustment and if touchscreen, test touch functionality.
If everything works, power off, disconnect the battery, and reassemble any remaining covers.

Common pitfalls to avoid:

Forgetting to connect the cable before mounting the screen – you will need to redo the steps.
Pinching the LCD cable in the hinge area – route it carefully exactly as the original.
Using screws that are too long – they can damage the screen or the A Cover.
Not removing all old adhesive – this can cause the bezel to sit unevenly.

Watch our installation video or consult your laptop's service manual for model‑specific details.

What precautions should I take, and what if the screen does not work after installation?

Critical precautions:

Always disconnect the battery before handling any screen or cable – the LCD backlight can carry high voltage (up to 40V) and can damage the inverter or GPU.
Handle the screen by the edges – avoid touching the glass surface or the gold contacts on the cable.
Never bend or flex the screen – the glass can crack easily.
Use ESD protection – wear an anti‑static wrist strap or touch a grounded metal object before touching components.
Do not over‑tighten screws – screen frames are delicate; snug is enough.
Keep the screen clean – any dust or fingerprints on the inner surface will be visible when the backlight is on.

Troubleshooting – what if the screen does not work after installation?

No display (black screen):
- Check that the LCD cable is fully inserted and locked on both the screen and motherboard ends.
- Verify the laptop is powered on (listen for fan or look for caps lock light).
- Test with an external monitor to confirm the laptop is outputting video – if external works, the issue is with the screen or cable.
- Inspect the cable for damage – a pinched cable can break internal traces.
Backlight is on but no image (blank white/grey screen):
- This usually indicates the video data lines are not connected – reseat the cable, check for bent pins on the connector.
- Verify that the screen is compatible with your laptop's interface (e.g., eDP vs LVDS).
Flickering or intermittent display:
- Check cable routing – it may be pinched in the hinge area.
- Ensure the cable is not pulled taut – there should be a slight slack.
Lines, artifacts, or distorted colours:
- Reseat the cable – sometimes a poor connection causes signal noise.
- If lines persist, the screen may be defective – contact support.
Touch not working (for touch screens):
- Confirm the digitizer cable (if separate) is connected.
- Install the correct touch driver – some laptops need a specific driver for the new panel.
- Check BIOS settings – some laptops have a touch enable/disable option.
Brightness adjustment not working:
- Ensure the backlight cable (if separate) is connected.
- Check if the laptop’s brightness keys are functioning – if not, try reinstalling the graphics driver.
Screen is too dark or uneven backlight:
- This could be a backlight issue – ensure the connector is fully seated.
- If the screen is a different model, the brightness levels may be interpreted differently – adjust in the OS.

If you have tried all the above and the problem persists: Contact our support with photos of the screen issue and your laptop model – we will help diagnose and arrange a replacement if necessary.

New arrive

MSI MS-18L2 fan original PABD18010SH-N541

‌EUR € 19.80

MSI MS-1824 fan original PABD18010SH-N541

‌EUR € 19.80

MSI Titan18 HX fan original PABD18010SH-N541

‌EUR € 19.80

MSI MS-18L2 fan original PABD18010SH-N542

‌EUR € 16.20